Hansk

im running a pioneer AVP3100 dvd and my question is im trying to hook up a toggle switch to the picture wire the from the HU ( supposed to be hooked up to the E brake) so i can see dvds while trying on trips and i hooked it up to toggle switch+ and ground the other side to chassis but it wont work... and it worked when it was in my other car 3 weeks ago. its not the same toggle switch that i had before. its a little smaller but still the regular old easy toggle switchon/off switch , + / - wire leads)... anybody know why it wouldnt work?? could it be the toggle switch?? or would anybody else know how to wire that up so it will play dvds? thatnks in advance

ill give it a try and see what happens... you can get relays at autozone right... i think ive seen then there before

ya i know what it does .... ive just never hooked one up before....

alright ill take a look at it.. i've just never installed a relay before...

I know u can do it like that but the whole thing is if it needs a relay then why did it work before.... So I don't think this models needs a relay to do this

its basically fooling the HU to think that the toggle switch is the E-brake- but i have been told when hooking up toggle switches that you have to ground it as well as the power source just like anything with electrical..

I tried 2 different grounds... And nothing... I think I'm going to pick up a new toggle switch tomorrow and try that

nobody else .... im just baffled by why it wont work...

i un plugged the HU when the car was off

im hooking it up the same way i had it 3 weeks ago and now it wont work.. its a different toggle switch but the same pos and neg hook up... u think that could have something to do with it..???

i did it like that... it would just play music and no video.....

ok, so i live in Atlanta and there are barely any events in my state. Don't know why(if anybody does let me know). but i'm wondering if anyone on this forum from Atlanta knows where i can take my car get get it metered on a TL or if anybody knows where i could go? thanks in advanced. i wanna know what kinda numbers my system does and i have thought about starting to compete.

nobody??

welcome to this awesome forum.. recently been interested in stetsom amps

if i live in arizona, i'd go.... but it seems like there is never anything going on in atlanta....

it was around 190 bc i lost my 6x8 mounting plates that came with my 6.5 set and they had to make new ones

well, my subaru kicked the bucket and i went and bought a 2003 Ford Explorer with 61,000 miles on it this past sunday. Which means i get to un-install all the stuff from my subaru and re-install everything back into the explorer. This is what i have done so far... -headunit -2 amps -second batt -and of course subs and box and my dumbass forgot to take a lot of pictures., i dont know what it is but once i get to working i just forget completely about pis. i think the only 2 pics i got is when i had the dash out for the head unit and when mounting the fuse under the hood. but this is what i got still gotta mount the bass knob somewhere still gotta buy a new toggle switch for the e-brake wire man it was a B**** to hook the wires to the batt up under that seat.... hardly any room the box sounds a lot better in this car cause there a lot more room around the box for the sounds waves to get by my fiance wanting to drive my car for the first time so i figured a good video time.... my fiance explains how much vibrations thee were....hahaha vibrations still left to do it reinstall my door speakers which are alpine type r components.. maybe do some door pods in the future and some a pillars but i gotta figure out a way to do it b/c im planning on not having the car too long do i don't wanna have to do some fabrication that not needed so i can sell it. let me know what ya'll think..

well today i got my component speakers put in my car, but i didn't do this one myself. reason being i've never put tweets in the a pillars before so i wanted to see how it was done. i took it to a shop by my house and they let me stick around and watch while they did it so i could see how it was done( i didn't want to mess anything up). here are the picks. let me know what you think. i might get another set and find someone around my area that knows how to do door pods and help me with that cause i really don't know how to do that either. i mean ive played around with a practice one before but i'm going to need some guidance on that one.

x2

ya if your looking for ""SQL"" then ya go with the havocs

"""SQL""" lol sorry slipped my mind

just to let you know ... you really cant have the best of both worlds... its either SQ or SPL. somebody correct me if i'm wrong

im running 2 dc level 4 15's with lvl 5 dual 1 ohm coils , rated at 1500 watts a piece and i only have 2000 total to them and let me tell you they get loud and i LOVE them... if your looking to get loud, i would recommend DC anyday...