reksp13

OK New amp and sub arrived. And I am already happy with just adding the amp. I am currently working on the boxes. I Have ran in to a new problem. My trunk!!!! In between were the bottom of the rear window and where the trunk meet rattles. The seals or good and it a 2007 Accord. The trunk is just sealed to good and there is no place for the air escape so it lifts the trunk up away from the seals. I bent the hinges a bit to make a tighter seal and that helped a little(very little). Any ideas? I know when I add the third sub its just going to get worst. The whole trunk is already dynomatted. Its not that. I Don't know.

Thanks everyone for your input. I odered the new amp. I am going to try ported boxes. If that still dont do the trick then adding the extra sub is next. I am also going to take the advice of djphilly and order a Soundstream BX12 Bass Processor. I will keep you guys up to date and post pictures when complete.

Ok, so I should go with a ported box? I am confused. I dont mind putting the work. I will do all that is needed to make this system hit hard. Soundstream doesnt give much info about wattage for sealed vearse ported boxes. I'm sorry that what I thought was gonig to be an easy question turned out to be so indepth. This equpment is all installed in a 2007 Honda Accord trunk. I listen to 80's freestyle and hip hop If this helps. I realy want to not have to do this a third time.

I was not at all satisfied with the way these subs where hitting. And by the way they were jumping, they don't really look like they can handle much more power. That is why I was considering the third sub. Does anyone know much about soundstream these days? I hear that a few years back power acoustic bought them and they went down hill.Of course I heard that after I bought this equipment. I just remember having OLD school reference amps and SPL sub's and they hit hard. Should I redesign my boxes? they are each in 1.2 cuft sealed boxes. Should I go ported?

Ok here is where I'm at, I have a Pioneer AVH-P4100DVD (2) MB quarts 6 1/2 components (2) MB Quarts 6x9s powered by a Soundstream PSA4.260 and (2) Soundstream RW 12 Subs (600 watts RMS each) Powered by a SoundStream PSA2.760 (760 Watts RMS bridged @ 4 ohms) Wired like so: How ever I was not satisfied. And low and behold, today my PSA2.760 took a dump. I called the company where I purchased it and they said they will send it out to get repaired or I can upgrade it for a small price to a Soundstream PCA-2000D. This amps specs are 4ohms 1100 watts, 2ohms 1500 watts, and 4ohms 2000 watts Bridged. What I wanted to know since this new amp is more powerful should should I add another RW 12 sub (3) total. And Wire like this: What I really want to know is should I just let repair the amp and deal with what I got, Opt 2 Upgrade amp, or Upgrade Amp and sub. I just dont want spend any more money if I am just wasting my time with this equipment. Thank you for your advice.

Just wanted to say whats up to every one.

A member of another forum (mp3car) said this is a good place