thizzkid

wow you actually did start a thread on money makin lmao just recently after reading the sticky on Setting gains with DMM, ive started charging people to set there gains on there amps, mostly ghetto people who are un-aware that Gain knobs are not mini volume knobs. if you know alot of young people who are novice at this kind of stuff, you can make a few bucks. Charge people for -setting gains with DMM -Amp kit installation -Installing Head Units -Making Sub boxes -BIG 3 -ETC, the list goes on

not you, i meant the recession lol, a fan would be ideal to push air, but i meant pushin air with ported boxes haha

hey everyone, so today i went to harbor freight tools, got a DMM on sale for 3.00 dollars, the name brand was cen-tech, heres the link CEN-TECH MULIMETER so anyways i got home, logged on, looked on the stickies for the Setting gain with DMM tut and i done everything i was suppose to, minimized HU Settings,bass,treble,etc, used a 50 hz tone 0 db, and when i connected the DMM to the speaker output with no load, i had to set the gain almost at 3/4 to get my voltage i have a hifonics bxi 1200 watt amp at 1 ohm load on 2 12" pioneer 308D4 rated at 400 rms per sub HU is kenwood MPC205, 2 volts at sub pre-out 1200 wrms at 1 ohm load so 34.64 Volts is what im striving for on my dmm right? For some reason my meter can only read up to 3 digits for example, when i set my gain 3/4 up, i get to 34.6 volts as a reading on my DMM, is that ok? i dont want to overstress my amp, so would lowering the volts to 33.6 be safer on my amp? and by the way i forgot to mention that the DMM can read ACV at a 750 volt scale or a 200volt scale and i set it to 200 volt scale is that ok? thanks again guys

very true, damn you recession, its because of you, i cant manage to have 4 12"s in my ford explorer pushin air lmao

agree, your setup I bet is more tuned since it requires lower frequencys. For a basic setup i think 50Hz is alright.

as far as i know, when you set your gains and use a mp3 player via AUX input, you should set it to the max, then set your HU to where you think you hear no distortion, at that point start moving your gain up. when you use test tones, make sure its 50hz, thats the usual sub sound, i heard of people using others, but if your just doing a basic sub setup, stick with 50hz 0 db mp3 turn q off or to the lowest setting if anything i said is wrong please correct me SSA members

same here bro, ive been searchin forums left and right for info, but this site right here, gives you all the info you need plus a great a** community, full of people who know what there doing. one more time, SSA FTW!!

when im bringing home more money, ill take a O-scope into consideration, but as of right now, i think the DMM is doing just what i need, I AM A redo my gain settings, i need to set the treble before i start adjusting the gain. SSA FTW! thanks guys

I dont use the bass knob, heard from to many people that it increases distortion, IE, the dirty signals, so i keep it off. My HU maxes at 35, so the max i go up to is 26. When i did my gains with the DMM, 26 was the highest i went on my HU with the 50 Hz tone on repeat

well yea i followed those instructions, my settings on the HU when i setted it was -8 bass, -8 treble. After i setted the gain with my DMM, i turned the treble up to 0.

hell yea super fast response, thanks for the input guys deeply appreciated SSA FTW!!

thanks CrazyKenKid for the feedback, so with that all being said, im pretty much set on my gains, one other question, lately my cars been smelling like the new subwoofer smell, i havent push my subs to hard since its still pretty new, is that normal?

hows everyone doing, im new to the forum, had some guy at caraudio.com refer me to this site, and so far it looks like a 5/5 type of site i need to mingle on =)

thanks guys for the quick reply, ill finish the big 3, and let you guys know whats up, like i said, thanks again for all who gave me feedback