solobaric_kid

I order a btl last year some time an when I recieved it I had alot of problems like you! It end up not being magnetized, idk if you tryed to put anything metal near to see if it will pull it in or not but it's worth a try! They don't have that problem very often but they will take care of the problem for you if that's it!

hey guys i have 2 hifonics xxv colossus amps an i have been told, i could link them with this MLX-100? if so how would i go about doing that? my amps dont have a master/slave switch.

anybody?

THANK YOU ALOT i just got my sub back an the magnet is definatly strong now!!! also i appreciate all the shirts an stickers you guys sent with it! Fi is AWESOME!!!! I will be spreading the word around about Fi around here!! they fixed my problem an got it back to me very quickly! will be dioing more business with these guys in the future!!

ok so i ordered my sub right around valintines day an it took over a month to get here an i finally got time to build a box this week end an hook it up! it never seen power till to day an i thought my amp was fried at first i couldnt get any sound or movement out of it at all.. so i hooked it up to a friends amp an it barely played so we put it back in my car on my amp. when we did that it finally started to play on my amp.. but it barely moves an you cant even here it hardly unless you get close to the sub. i tryed rewiring it a couple different times an it still just doesnt play hardly.. what is wrong with it? i know it aint the amp because i hooked my tens up an they played just fine! so please help me! its a d1 sub wired to 2ohms because my amp does max at 2ohms! all power wire is 0 gauge speaker wire is 10gauge have yellow top and a xs power d2400 in the back have big 3 done up front! i tryed switching my rca cables out an made no difference have good grounds in the back every thing is working fine except for my btl 15! please help me out!!

so i checked the shipping statas an it said delivered im suprised it got there a day earlyer than it was suposed to!

i checked that be for i sent it off!! i could here it poping but because the magnet wasnt magnatized it wouldnt move the sub at all! the coils were doing there part because i could here them poping every time! and yes it is on the way back to them now!

Thanks I've heard they are really good guys! I'm just ready to hear it!

well its on its way there now!! i took it to ups today an it has already made it to a few different places but according to the tracking number you should be getting it in on the 27! shipping for that beast was 51.90! bought broke me to send it in hahaha!

Ok so I've been trying to call warranty hotline all day an haven't gotta answer yet? Is there anybody there or what? Not trying to be rude or anything just wondering

yea i still have every thing from when i bought it so it will be the way they shiped it to me! but do i need to get like a RMA# or something like that? i have a paper that says any product sent in without on will be sent back without being looked at all! and also how much is shipping gunna be for this massive beast?

so i just put it all in the origal box a take it to ups?

so what do i need to do about that? i really dont want this thing being a paper wait!

So i tryed the battery an it pops both coils but you can't tell wat way the sub moves.. Can't get the magnet to do anything with a screw i just tested each coil they both read .08 ohms then i put my jumper in to connect the coils like i have been an it read 1.6 ohms.. so i dont know wat to do ive tryed alot of different things and im not getting anywhere!

So I'm gunna try all the above after I get out of skool today! What am I looking for when I put a screw on the magnet? Do I have to pull the rubber case of the magnet first?

Ok I'll definatly try the battery trick! Do I do that with my wires hooked up? I'm guessing I do but just wana be sure!

should the - from the amp be on the left, or the - that goes to the + be on the left?

Wen I hooked it up on his amp it was threw his car he backed up an we ran wire from his trunk to mine an I then hooked up a pair of tens to my amp an they played just fine! That's why Im askin if it's my new btl sub?

I have a hifonics xxv colossus an from the amp I have the positive from amp to on coil an the negative from the amp to the other coil an the the negative an positive that are left are connected I got the diagram from the12volt.com I wire it to 2ohMs if I confused you sorry!

so ive built a few boxes before an they were simple an nothing special so i use a box calculater that i no longer have( computer crashed)! so im trying to build a box for this 15 btl fl to go in the hatch back of my 1982 mustang! i found a new box tuning calculater (torres) from smd site it has the height 1 an 2 an depth 1 an 2 so i figured hey it will work but it doesnt for me..it messes up an doesnt add height 2 in so i makes it just a square box i wana do 21" tall front 13.50" tall in back 17" deep an 35" wide.. with them specs i want sub up flush mounted an the port would have to go forward towards the top of the box! if that makes since.so THE would make the inside measurements be 19.50" tall front 12" tall back 15.50" deep an 33.50 " wide. my question is how much air space is that? i try do the math with pencil an paper but got really lost! i know im a noob an all but please somebody help me out an sorry if it does not make any since if not the ask an ill try to explain the best i can to you! thank!

TTT

so do you think that thats plenty of room for that sub once i add the port? i know that Fi's site says 3-5ft air.. also for bracing i had planed on making the whole box 1 an half inches think so thats would be 2 layers of 3/4 inches mdf im just guessing that aint enough? what else should i consider? thanks

any body wana help/ bump

i will be getting my fl btl 15 on the 11 an i ordered it on the 12th of feb! i didnt email them one time i seen where they were putting the wait time on their web page so i just waited! i will be very pleased when it shows up here!!

i have two decks laying here that i can pick from.. i have a Alpine cda 7875, or i have a kenwood kvt-617dvd. if you had to pick which one to use what would you pick an why?