ssh

Looks very loud, not many vehicles can be loud and maintain "dailyness", losing little space, or being a work truck I bet all the sound deadener helps the roof and door panels from flexing like crazy.

Mic sucks hehe, video was sick tho, your headliner and windshield flexing, nasty. Can't wait for more videos. Oh and make a beauty panel and seal trunk off. It'll get louder...

You don't need a new hu with 4v preout, that wont solve anything. The gain is there for a reason, to match signal voltages. Whether its 3/4 the way up on a 2v preout hu or 1/4 on a 4v preout hu

Use a dmm on the battery terminals to verfiy that. Measure with car idling and amp at full tilt.

Low voltage, not enough amperage.

Wiring to 1ohm or still 4ohm? Rf amp has a fixed ssf right? Where's the lpf set to? Oh and voltage at the amp? Gain set by ear?

Voted!

You do realize these are custom built to order subwoofers, and you aren't their only customer. That's my point exactly. Because they're custom built and that takes time, they most likely didn't ship his order contrary to what that email said. Yes, but you don't need to "hound" them to get your drivers. Just giving them a call along with the email should fix things.

You do realize these are custom built to order subwoofers, and you aren't their only customer.

13v is good for batteries, so there charged, dont worry about that. Oh and yeah you can charge all your batteries by putting the charger on your starting battery, as long as the rear batteries are connected to the starting battery. Although the rear batteries may get a better charge if you put the charger on them from the back. The alternator case is the grounding point, so when it's bolted in, the chassis is grounded to it, and negative battery terminal. So if the alt case has a place to connect some extra wire to the negative battery terminal, that works. If not, not an issue, I'd actually be surprised if it had a place for an additional ground. Wire from positive stud on alt goes to positive battery terminal.

Box is so sick, end of story. *drools*

X10 Have another on the way! woooo! Lucky I bought the d1200, I think. For the time being, then Ill get another to match it, when I can afford it XS Power & DC Power ftmfw!

Not gonna say it's perfect... Had to run out the door...

Glad I went with xs power

Just another reason the whole thing is sorta a joke, too many variables...

Awesome work as always

Sweet! Facebook time

Kerfed port and rounded off edges with pvc, less turbulence or of the sort. Assuming inside edges are rounded off too Still impressive if you can put it in almost any vehicle and do 150s with that amount of power

So what happens if you press the black piece up with your finger, does it play normal?

Good videos Kyle. Always knew big alts put stress on little engines , always figured the car would compensate soon enough, forgot about disconnecting battery to wipe it clean. What size engine is in your car? I think mine will be in for a hurting

Man I loved how my icon sounded, can't wait to hear the xcons.

Sweet! Another Sefugi build

What about Zcon? Very nice photos, like the first one better. I completely forgot to be honest Shame.... Shame.. Buy me some, then ill never forget again

What about Zcon? Very nice photos, like the first one better. I completely forgot to be honest