ssh

Sean, you opened up a big can of worms in that Skar thread. <- Lost the patience for dealing with threads like that.

Had my forks serviced after one of the seals was leaking, and the other fork leg had blown the interior valve seal so it had zero damping. Everything fixed, set to factory specs, and the forks are way too stiff. Figured after a few rides perhaps they would break in--nope. Checked the oil level, and correct weight, so for now I'm trying 20cc less. It's still a mindfuck though.

Drove the chevy to the levy, but the levy was dry.

Speaking of animals. Found a pitbull earlier this night. Luckily she had tags, and the owner came fast.

"Anal sex on IQR." I know how that goes.

Any offers?

Used Hertz EP1D 1000w amp, $210 shipped full specs: http://caraudiosecur...ts_id/8116.html Output Power (RMS): 400W x 1 @4-ohm 750W x 1 @2-ohm 1000W x 1 @1-ohm HP Link mode RMS Power: 1500W x 1 (4-ohm - HP LINK) 1700W x 1 (2-ohm - HP LINK) Low Pass Filter: 25 - 250Hz @24dB/Oct (L+R) Subsonic: By-pass / 10 - 50Hz @24dB/Oct Output Phase Selector: 0/180 Degress EP LINK mode: Master/Slave Bass Boost: 0-18dB @50Hz Output Filter: Continuous 0-180 @12dB/Oct T.H.D. (100Hz @4-ohm): 0.15% Bandwith (-3 dB): 10 - 250Hz S/N Ratio (A weighted @1V): 100dBA Damping Factor (100Hz @4-ohm) >100 Pre-In sensitivity: 0.3-5Volts Pre-In impedence: 15 kohms Speaker-In sensitivity: 1.4-24Volts Speaker-in impendence@ 5kOhms Load impendence: 4-1Ohms Power supply voltage: 11 - 15Volts Idling current: 2A Idling current when off: 0.04mA Consumption @1ohm, 14.4VDC: 56A Remote In: 6-15 VDC - 1mA Remote Out: 12 VDC - 50mA Automatic Turn On/Off with speaker in Fuse: 3x40A RVC (A-remote Volume Control - OPTIONAL) Dimensions (mm): 240 x 350 x 54

Nokia's have two auxiliary audio ports? Sweet! Or all her holes are filled cause Sasha Grey is Sasha Grey?

Every report I've heard has described it exactly as that article. They found the injured fawn and called the DNR for assistance. The DNR basically told them to release to the wild and let it die, and it was illegal for them to keep it. They kept it anyways to rehabilitate it. When the DNR found out they went there to euthanize the deer, but by the time they got there the deer was released. So the DNR was bringing charges against them which could have resulted in 6 months (I believe) in jail plus fines. Friday following the news coverage is when the Governor basically told them to drop the case. If I was that cop I'd follow the jackass from DNR who pushed the case, and write him tickets left and right for unsafe lane changes, and the classic "Your tail-light is broken. No it's not. *bam* Now it is." Think that plan might backfire.....the DNR is the most powerful law enforcement agency in the state ;)/> They basically have all of the power of every other state law enforcement agency, along with some power the others don't. God dammit. Id resort to things that mustn't be mentioned in public.

Every report I've heard has described it exactly as that article. They found the injured fawn and called the DNR for assistance. The DNR basically told them to release to the wild and let it die, and it was illegal for them to keep it. They kept it anyways to rehabilitate it. When the DNR found out they went there to euthanize the deer, but by the time they got there the deer was released. So the DNR was bringing charges against them which could have resulted in 6 months (I believe) in jail plus fines. Friday following the news coverage is when the Governor basically told them to drop the case. If I was that cop I'd follow the jackass from DNR who pushed the case, and write him tickets left and right for unsafe lane changes, and the classic "Your tail-light is broken. No it's not. *bam* Now it is."

Gotta hydroplane it, Bro!

lol, thanks for trying. I searched before that and found that forum that way. Not so helpful. Would have been funny if I had just posted: "Buy a Charolais heifer and AI it." in here to your original post.

I'm in Indiana where this was obviously pretty big news. The newly elected Governor has "requested" the DNR re-evaluate the case. I believe last I heard the DNR was dropping the case against them. I don't know the whole story, but if it's exactly how that article snippet describes then that's the shit that drives me insane.

Though Gold has risen in value, I'd consider it more of securing your purchasing power in regards to inflation.

I searched: "wagyu breeder minnesota" just for kicks, and promptly found your post at cattletoday--lol.

Oh okay. Just wasn't sure how pissed off you wanted to make him.

Pioneer's account was made in 2008.

Florida is riddled with asshats.

The last ticket I got for going 87 in a 75 was in a Kia Sedona minivan.

All I can say is be considerate of others. Just because one likes loud music doesn't mean everyone else does too. I have a neighbor who regularly cruises down my street blasting music like a thug, and I find it pretty annoying. On the other hand I have some other neighbors that are old, and have absolutely nothing better to do with their lives then make mine difficult. I'm not sure what the laws are in Alaska, but in AZ if you fight a citation and lose then they can charge an additional percentage fee on the citation to cover the court time. IE: $250 ticket now becomes $325

http://www.bitpusher.in/ sealed enclosure page input dimensions, driver displacement, double baffle option, end up with net volume. Pretty basic. port area page input driver's partial t/s specs, and calculate port area based on vent mach. ported enclosure page input dimensions, driver displacement, double baffle option, port area / number or aeroports, end up with net volume and proper port length (accounts for port displacement). I started this in the morning, and just finished. From all the testing I've done I haven't run into any issues, but feel free to try it yourself, and post back. Hope this alleviates some headache in designing your boxes.

I need some rawr in mine even tho it's only 116hp. I've been tinkering with this idea of a dual exhaust, just need to figure out how to tune the sound to my likings. I need some more rawr in mine. It's only 503hp. Perhaps time for new iron. You should drive something with 150hp for a few weeks, and then you won't "need" something new. Unless the torque is lacking.