Randal Johnson

Hmm, news to me. *goes to search* I just went over to CA-F and double checked and I can click on the counter and see who made the upgrade or downgrade.

We had a spammer doing this on CA-F. I think he finally got caught and banned by Aaron. I do know that mods can put their mouse icon on the counter and see who made that upgrade or downgrade ...

I can't remember with this one ... Is there an option for the BOSE 8" midbass driver for the doors like the Trail blazers ??? If so, you could get those mounting brackets and install you a nice pair of 8s in those factory door locations ...

Are you saying that you have 2 amplifiers ... one for each sub ?? Meaning a different brand per driver ??? or you have one amplifier now powering both drivers ??

Your enclosure is 90% of the sub setup, so yes it is most likely the problem.90 percent ... No, I wouldn't go that far. If that was the case, There wouldn't have been any need to go with those expensive Zcons you're running. You could have done just as good with a custom built CNC enclosure with a pair of Funkey Pups ... In order to have a good / great sub stage, you need to have basically all of these areas working together ... Source unit, Electrical (Battery power / wiring), adequate amplifier power, well designed / built drivers, and well designed / built enclosure ... There is alot of questions in this thread about the amplifier that has not been answered yet ... Yes, I agree that he needs a new enclosure build, but if that used amplifier is not working good (its possible that the power supply in that amplifier is not delivering adequate power to the output fets like it should), there may be more work that needs to be done to help this guy solve his problems ... Honnestly, he should have left the enclosure(s) alone to do the amplifier swap ... then change port tuning if need be ... Question for the Op ... Why did your origional amplifier blow up ???

Did you verify your final tuning ??? Are you sure it's 36-37 and not 46-56 (or possibly higher) htz by mistake ??? stranger things has happened ...

Is this set up in a 98 GMC Sierra ext. cab ?? If so, is the enclosure(s) on the floor (meaning the back seat is either up or removed) or is the enclosure(s) laying up on the back seat ???

Nice

Welcome to SSA

Dang !!! This car is looking Good !!!

Nice ... I hear alot of good from Chevy !!! Wish our company used them.

Driven both for many years ... The 6.0 wasn't worthy enough to even hold the jock strap of the PowerStroke 7.4 !!! My 98 F450 with that 7.4 rode and drove like a sports truck from the day they gave it to me until I gave it back for the newer one with the 6.0 ... 3 days of driving it, I went back in and asked for my old truck back. Resale on those 7.4 must have been realy good at that time cause the old truck lasted for one day in the auction yard ... Those 6.0 trucks stayed in the mechanic shops ...

I've been driving Ford PowerStroke Bucket trucks for years !!! They run good, but when the gas tanks started deteriorating ... the problems start !!! Now I drive a bucket truck with the V-10 ... Not as strong and powerfull as the power strokes, but overall ... WAY better setup !!! Gas mileage could be better, but you have to think this is a 1 1/2 ton (F450) loaded bucket truck we are talking about here ...

Glad to hear a good review !!! Me and my son will be going to see this movie some time this weekend ...

Welcome to SSA and Best of luck Sir !!!

GLWS !!!

Thanks !!! No, haven't been told about any stickers ... But I am working on haveing a custom plexi CNC (Jimmy Walker's Shop Bot) cut with all of my sponsors on it to go on my trunk lid lit up with multi - color strips ...

Welcome to SSA

Awesome SUV toy Sir !!!

PM sent your way Sir ...

Thanks man ... I guess I will try my best to measure out my installation / wiring points for my multi color strips when I throw the jack stands under her when I get back to work on the Brakes ... Speaking about the brakes ... I found a place (I think) where I can order a 4 wheel disc brake kit for my stock suspension ... Think it would be really cool to have disc brakes and air bags on a stock suspension !!! Dang !!! Almost forgot to tell you Clint ... While we were scoping out the install for a electric fan, we found some really cool places to mount the HID ballast !!! Close to the horn locations and should look cool when you open the hood and see a sponsor product !!!

Thanks man !!!I need to aquire some remote turn on (blue) wire and some speaker wire for this wiring project. I also need to come up with the wiring scheme for the Under Body, Hub / Grille Glows, Amplifier Rack, Trunk, and any other LED setups that will need go go into this vehicle ... The interior lumination LEDs should be separate from the rest of the LED stuff ... I think This wiring harness should go in quickly once I actually get started on it ... Finally !!! Got the insurance money needed to have my truck painted. Hopefuly I can get that finally done over the next couple of weeks so I get started back on this project ...

How bout them apples !!! Plum Crazy Purple !!! Well dang, for some reason my car leaked out all of It's brake fluid that night (possibly during the week while it was just sitting there) and so we had to very slowly move the car out of the car cover onto the road ... This sux !!! Guess I know what I have to do when I can get back to work on this car ...