Randal Johnson

Could do something like this ... just a suggestion ...

Best of luck Sir !!! Get to work !!!

one word ... "Bromo" look him up ...

Awesome Vid my GMT400 brother !!!

did you try the tweeters higher ?? like in the middle of the a-pillar ??

should work fine ... been done before if thats the positive lead, you might want to put some small shrinkboot on there ...

was the stage and image higher than your origional setup ??

I would never install or suggest a midrange driver to go in the kick pannel ... The idea for a stage and image is to be up and out on your hood ... Correct ?? and width to seem to be as it was beyond the a-pillars ?? Can't wait to hear what stefanhinote has to say after this test ...

Besides, half way up the a-pillars, isn't that ear level in a normal driving position (give or take a few inches)

I never said that (2600htz). Would be a final setting ... I wasn't done explaining my idea of the setup ... But this was a trial tuning (with no other drivers) to set the stage ...

Yes ... This will set your stage, give you width and height Once your tone is correct with aiming ... Then you can time align to the center and keep your width at the same time

Take your tweeters and temporary mount them (with tape or something) half way up on your a-pillars, aim them at each other slightly angled above your center point in your winshield ... Actively cross them at 2600 htz, and come back and tell me what you think ...

Get to it bro !!!

I would get smaller tweeters and mount them in the a-pillars to start off with a eye-level sound stage and go from there ... Yes, install the mid drivers in the doors ... And do not use the kicks unless there is no other option ... I thought those kicks you made (looked great but ...) was taking up too much leg room ...

got alot of my lights (mainly the dash cluster and cabin lights) swapped out with LEDS ... they are Awesome ...

your heater / evaporator core is not leaking ???

Welcome to SSA

I would have moved this thread for you ... but ...

Awesome Sir !!!

Nice !!!

Is it true that you have to pay yearly membership before competition so you can aquire enough points to qualify for world finals ?? I will be attending Lebanon, Tn on 2 - 26 ... My first MECA event ...