VarinaBassing

People do tons of testing to find the proper tuning to score high numbers. I know you will need to tune higher looking in the 40s maybe start at 40 even and work up its a try and try again kinda thing also firing direction will help along with proper sound deading lots and lots of things to try and change

anyone have experience with these looking for how they react to port area do they like a lot or little ? i was thinking about running 2 of them in 2cube each box tuned to 34 or 33 htz with 2 4 in flared ports but using the aero ports 4in its either 2 which is like 6.25port area per cube or 3 which is 9.30 port area per cube Any advice will be welcome thanks reggie

thats what i was worried about but three is so much area i dont want them to go nuts or sound peaky looking for a relative flat curve dont you get this with less port area ?

site says 16.5mm one way or .65in one way

I love my four 10s they are moving so much air I a now a sundown customer for life

I thik with the big three your probably pretty good not sure size of her alt or battery but most are fine under like 1500watts

I found some JL 8w0 subs for 50$$ Worth it ?? They decent subs ? I looking for some cheapys for my mothers car she wants a little thump lol

take a new wire and add the ground to each device one at a time til the noise is gone this might let you know which ground is bad

Thanks this was the answer i was looking for... Sorry for the constant bumps

Ok i have always used areo ports and now i want to try a slot. I have used a few calculators and they tell me my length needs to be 23in long for the tune i want what length are they referring to? Overall length of the port ? Can some one please help lol I am looking to build a 5cube box for 4 sa 10s tuned to 35-36 htz I figured with the displacement of the subs and port i woul need a gross volume of 5.8cubes that would bring the net volume down to 5-5.1 right ? So far i have gotten the measurements from the calculator width-45in heigth-20in depth-14in. This box is going in a quad cab ram so i have space. Am i right with these measurements? and i am shooting for a mix of loud with some musical so i wanted to stay around 68-70 squared port area ? How wide should the port be ? I was thinking 4in but not sure And this is when that length deal comes into play... Thanks In advance Reggie

nap before night shift bump

bump

Ok i ownload tat calculator and is helping but how long do i makethe board in the back is there a way to tell ?

does anyone have a good calculator for box volume and port

does anyone have a good calculator for box volume and port

i never done a truck box but i read subs up port up helps to be louder. I havent measured i have a lot of room about 24 in high 48 wide and 20 deep if i need it

I was going to do subs up port up. I see wat your saying now But how would that work for me ??

the 12volt one so i would need it to go 12.5 in into the box? then that 24 is the board that runs along the back

I am respectful but i bump when there are people around I am prepared for the ticket and will bump to pay it and bump leaving. I turn it down at night and rd lights other than that its fair game. Like me coming throu for a min max is going to ruin somones whole day and if so buy ear muffs

bumpp

well the ssf is fixed at 28htz which is a problem for higher tuned boxes I thought the rated was 600 my birthsheets says i am putting out 3303 at 1 ohm. But i just put my numbers into 12volt and it said my box is 6.4 cubes while re says 5.6 cubes i did a search and see re is off so back to the drawing board lol 12volt says y measurements should be width 44 height 20 depth 14

Ok i am still tryin to get the math down and figure out what would be the best overall enclosure . I want a wide range of response and to be loud as well. I know going with a high tune will most likely produce high spl levels but this is not a competion box. I am not interested in serious sq but want it to be musical and not really peaky I have some box specs and would like some help in deciding if the box will work for what i want width- 47in height- 21in depth-14in port width-3.5 port lenght1-9.75 port lenght2-3 port area -68 volume 5.6cubes tuned 35htz

rockford t2500.1bd i am getting a eq so i can adjust the ssf i have been told they can handle the power so we will see

4 sorry forgot to metion i have made so may threadz lol

Ok i m trying to get the best box i can for my tens i have been going back and forth on size and tuning. I just read the new thread saying about 1 cube would be good if you plan on pushing the subs i will be putting about 825 watts throu these for 10s. I thinking 35htz tuning. Should i aim for the 4 cubes or 1 cube a piece? low ? higher ? wats the displacement on these subs ? thanks