jj1479

Just checking to see if anyone had any experance with C2 audio's line of subs? I just Purchased a pair of there Threatcon-4 dual 2ohm subs for what I think was cheap ($199 each shipped) and they seem to be well built. But there is limited videos and user info on them. They say they handle 1500 rms and have a 4" coil. They are a brick and morter store in ohio so Hopefully they will hold there own and someone can chim in that has used them. Tried to post t/s parameters but the picture with the white backround doesn't come out readable.

Looking for a company to get a 12"sub magnetized. Purchased a Orion xtrpro around 4 years ago an the magnet somehow never got magnetized.

Well robotunderground emailed me back an said $25 to do it.

Ok ask them and see what they say. The sub is assembled an weighs around 12-18lbs I think so not sure if it would fit in the metal tray but see what they say. Like I said no one has emailed me back.

Then I assume that all subwoofer manufactures here in the states that build there subs here all have a magnetizer/charger? I've seen very few video's of some being done like EMF and there used to be a video around that showed the big ass magnetizer from the original Tc Sounds years ago with Thilo Stompler standing beside it but it was sold at the auction. Someone said to email robot underground an they could do it. We shall see. I emailed several manufactures an not one has returned an email yet.

Haven't bin around lately but what's up with these? Are they on hold for now? Checked your website and only component set is the sa series?

If I remember correctly Its bin awhile but FI used a 4" coil in there bl series for awhile and pretty sure it wasn't rated over 1500 watts. They didn't seem like it was a waste to use it.

FS:35.7HZ VAS:28.8682 L QES:.4082 QMS:2.2965 QTS:.3466 MMS:239.1952G BL:22.9272 SENS:87.0965DB http://www.c2audio.com/C2Audio-12-Threatcon-4-Woofer

Ok guys I Have my whole system for sale. Units are Sundown Auio 3500d works perfectly BUT one of the speaker screws is stripped but as I see its a common problem. unit comes with remote an box. Next is 2-15" Ascendant Audio Mayhem Dual 2ohm subs. one sub has 2 small 1/4" rip/tear on the top of the spider, left/right hand side they were bought like that from a fellow ssa member (mac an cheese) ands I seen a post awhile back about more subs that came with same problem. also for sale is 2 Kinetik HC2400 batteries and a Alpine INA-W900 dd indash dvd,gps unit. And lastly a Brand NEW never used Mechman alternator for a 2009 Ford Escape xlt V6 3.0. stuff is also on ebay for sale so first come fist serve. Also a piece of 3/4" plexi cncd with AA logo Sundown amp. $650 AA subs. $650 Kinetik batteries. $300 Alpine INA-W900.$500 Mechman Alt. $350 AA cncd plexi.$100 Buyer to pay shipping. Selling as I just purchased a New 2013 VW Jetta TDI and don't want to rip it apart yet..

Its a maybe. A member has sent me money towards it and was going to send me the rest but haven't heard from him for over a month. Won't return emails and his cell# doesn't work.

Price drop. Amp $600 Subs $575 + Shipping

Alpine radio sold.

yes pickup is fine.

So what happened to Shawn?

Was wondering if the center plate that says Sundown on my older 3500d will fit on the new 3500 amp? I kinda like the older one better.

Thats 4ohm you have stated. He has it wired the rite way. Dual 2ohm voice coils wired in parallel= 1ohm

Still have the amp?

Havent bin on in awile and maybe I missed something about it but I seen that Nick isnt working for Fi anymore?

Ya I know I can read thats why I asked to see if anyone knew why. now face slap yourself

Pretty sure these are for your model as they recomened the D50hc for it Impedance 1.4 per coil Paralleled Impedance .70 FO 42.322 Hz SD 53.200m sqM KRM 3.967m Ohm ERM 0.837 KXM 14.667m Ohm EXM 0.733 VAS 27.683 Liter CMS 68.881u M/N MMD 198.254 g MMS 205.309 g BL 8.918 TM QMS 7.814 QES 0.480 QTS 0.453 NO 0.422 % SPL 1watt/1meter 88.275 db PE 800 watts Mounting Depth 6.75. Cutout Diameter 11. Speaker Displacement .3 cubic ft. IMPORTANT: MMATS Pro Audio recommends an enclosure box of 2.5 cubic feet of NET Volume Displacement per Jugg 12 with a 30 sq. in. port 16. long. This would result in an enclosure size of approximately 3.2 cubic feet gross. If the enclosure is not to spec then you risk the integrity of the speaker as a result of mechanical failure and/or burned voice coil(s)!! The recommended amplifier is a D50HC paralleled to both voice coils resulting in an impedance of approximately 2/3 ohms. If you have any questions concerning the correct application of this driver, please call your MMATS Authorized Dealer or David Thompson at 561-848-7578 ext 600. Please Note . We have performed extensive testing with the application of this driver. This subwoofer is designed to match up and handle the output power from a D50HC only. This competition subwoofer has a 1-year parts and labor warranty with free return freight however a burned voice coil failure will not be covered under warranty.

Nice to see your passing the saveings onto the customers.

Love how low they can get it the box that they are in and they take all the 3500 can put out. I have yet to find time to put the plexi in but it will be in soon as i'm not going to waste all of the money for it to sit on the shelf in my garage.

Ok guys I just had to see what the subs sounded like in the box until the plexiglas with the AA logo inlay comes in from toolmaker and the LED's to arrive. They are in a 2009 Ford Escape an you can see from the picks the system consists of 2-15" D2 Ascendant Audio Mayhem's a Sundown Audio 3500d Running @.5ohm with a set of toolmaker dual inputs , 2 Kinetik HC2400's a optima redtop battery up front,had a second one but it died on me. The deck is a Alpine IVA-W205 and a Aura 4200 amp running 2 sets of 5.25" Kenwood components. I have a 270 amp Mechman alternator that I have to put back in but for now the stereo is running off of the factory 150 amp alt and all 1/0 knukoncepts wire. I have 1 layer of sounddeadner on the back hatch and roof but I will add more in the comming weeks. The box design is by Ram designs and is 7cft net tunned to 33hz and sounds really good. I have a video of them playing and will add it once its done uploading. Now I'm just trying to figure out what to cover the box in as the plexi is to be mounted from the inside Video's added