Argent Audio

Did you have a chance to make a mock up? Andrew

Hello fellow Californian! Andrew

Yes, a mock up is always a good choice. Andrew

PhishHead please note the box is only 29.50 Inches in length instead of 31 Inches. I accidentally added something in there twice. I have black carpet marked down Cheers, Andrew

Ok here is the first set of dimensions I came up with L - 32.00 Inches D - 19.50 Inches H - 16.00 Inches I can make it deeper and not as wide (length). Andrew

Ok I have H - 16.00 Inches D - 18.50 Inches L - 29.50 Inches That gives 2.5 Cubes for the sub .13 for sub disp .089 for bracing 14.6 x 2.5 Inch port opening gives 36.25 sq inches of port. Double Baffle, Flush Mount, and both sides indented .75 Inches, Dayton Audio Gold Plated Binding Post, black or charcoal carpet. $180 Shipped to your door step. Andrew

Firing towards the back of the car correct? Andrew

That should be more than enough for one 12. I will have something done up by tonight. Andrew

Jay is correct your going to be more than happy with a regular slot ported box. If thats what you want I can get it to you for $200 shipped. Andrew

You could go without the aero ports and save $30. Andrew

I do not think flush will be possible with only .25 of an inch on the top and bottom with the box being only 16 inches tall, and the sub being 15.5 inches tall. That does also not take into account a gap to get the sub inside the circle for the flush mount. Andrew

With the Length at 35.75 will be be enough room in your trunk on the side for the port to breath? $230, and that includes shipping. Andrew

Sure, I will do a google sketch up for it. It will be a 2D version as I'm still learning the ins and outs of the 3D aspect of it. Andrew

Yea, Pay pal is perfect. Once I get the max dimensions I can get this design finished up and get building Andrew

L - 35.75 D - 19.00 H - 15.00 Here are the revised dimensions with the depth only being 19 inches. Andrew

Current design I have L - 32.25 Inches D - 21 Inches H - 15 Inches 3.6 Cubes net tuned to 30 Hz via (1) 6 Inch aero port. Double Baffle, Flush Mount, and both sides indented .75 inch. Corner bracing in all 4 corners. Let me know how that sounds. Andrew

Ahhh so true. My brain is still half asleep today for some reason :/ Andrew

Ok cool, I have the design just about done. Just need to know what model sub so I can figure in displacement. Andrew

Ok if I could get your max dimensions that would be swell And would you like double baffle? Thanks so much, Andrew

I think they help a little little bit when your running low on port area, but nothing like an aero port. Andrew

Short, sweet and simple. This is just a standard slot port enclosure with some bracing.

Did you want a double baffle on that box? Andrew

thats the first time I've read or heard anywhere . aside from the fact that a slotted port has portarea losses in the corners because of the extra turbulence and often doesnt have kerfed ends (what actually alows you to keep the port shorter) , I see no reason why an aeroport would require half the surface-area , ofcourse the inner suface of an slotted port needs to be smoothed to minimize air-turbulence in the port and that is what what a lot of people forget to do .... the way I see it : the purpose of an aeroport defeats itself when you need more than 2 of them , inner-port surface area is key , offcourse if you want to do more than 2 for aesthetic reasons or because you're to lazy to smoothen a slotted port , I've got nothing against it ... both works just fine . oh one more note , I've seen tenth's gained by smoothing an aeroport , so those aren't that smooth eighter (tuning practically did not change) . In-depth way of calculating the required length of a flared port - SSA Car Audio Forum This thread has all the math and explanations you need The exact % is roughly 56% less port area with aero ports.

I'm shipping from CA, but that 170 includes shipping. But with flush mount and double baffle it will come out to $180 even. Let me know when you can give a 25% deposit so I can get building. It should only take a day to build once I get my jasper jig in (broke my old one ) Also what are you max dimensions? Andrew

OK I will come up with a design and get back to you tomorrow. Andrew