Argent Audio

http://www.parts-express.com/images/item_standard/091-1245_s.jpg Those are them. What you see on the outside of the box unscrews and you are able to just twist it down tight. So basically these things eliminate the weak point (plastic terminals) as most other boxes would have. Andrew What if I go ghetto style and put bolts instead. Would it work as good as these. Just don't look so cool? Yup they would. I'm not sure what all thread is coated in, so it might not conduct as well as these Dayton ones though. Andrew

Will post up specs etc in a bit...

I will send you a PM with the details Andrew

Thanks for all the comments We look forward to building many more!!

Nice work so far and I'm for sure feelin that logo, slick look!

W00t, we are going to raise them just slightly as the cost of the new carpet is 4 times that of the old stuff!!!

Ok here is what I have. 32 Hz Tuning. 37.25 Wide (38.75 after .75 indented sides) 17 Deep 18.5 Tall Gives: .09 Bracing .28 Sub disp 3.5 Air Space for Subs Port is 17 tall x 3 wide, yielding 51 sq inches of port, which comes out to 15.57 per cube. Double baffle, flush mount, grey carpet (I need to get you samples), Dayton Audio terminal. Since we upgraded the carpet we are adding $10 onto the price of ported boxes, which brings your total to $210 shipped. Andrew

http://www.parts-express.com/images/item_standard/091-1245_s.jpg Those are them. What you see on the outside of the box unscrews and you are able to just twist it down tight. So basically these things eliminate the weak point (plastic terminals) as most other boxes would have. Andrew

So heres the story... We started to carpet this bad boy with a cheaper grade carpet but decided it was not going to be up to our standards, so we ripped it off and redid it with this stuff NO PLASTIC TERMINALS ON OUR BOXES!!!!

Yup, I use Titebond II or Molding and Trim Glue. Andrew

Did you want slot ports or aero ports? The added cost would only be $10 for aero ports (2) 4inch ones. Andrew

I'm not sure what you mean by seal it. I put a corner brace in there for added strength. Andrew

Ok, I will make up a design and get back to you tomorrow AM so you can ok the size etc. Andrew

Thanks, just need to finish painting the port and carpet...

As for now no, I'm still waiting for my friend to get back to me that has one. Andrew

Jay-Cee asked all the correct questions I will check back later. Andrew

Returned. Andrew

Did you want a box for em?

A variation of tongue and groove. I got all the machines set up so I just want to test it out... Andrew

^^ can read minds haha Well a 3.5 cubes box is $190, double baffle +$5, flush mount +$5 = $200 even Andrew

It's going to be $200 even. Andrew

Don't mind the discolored MDF in the second picture. I wiped off the excess glue with a damp rag lol Also still need to paint the back piece of the port... Just waiting on the MDF I ordered to be delivered so I can finish the rest of it.

On second thoughts I might have access to one to play around with, I shall let you know about my findings tomorrow. Andrew