Argent Audio

Another good way to do so is to make a mock up out of card board to make sure you can get it in your trunk opening. Andrew

Andrew

That's what you think

Flush mount coming today also! Andrew

To start could you get me your max dimensions? And from what I can tell you want a mix of SPL/Daily? Andrew

http://www.homedepot.com/Paint-Primers/h_d1/N-5yc1vZ1xglZbt0t/R-100144601/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 This is the sealer you want

I have some nice stuff that is latex backed. 6 feet wide. I can sell it by the yard. Let me know if you are interested. It is the same stuff we carpet all of the Argent Audio boxes with. Andrew

I would do the Big 3 then see how things are going from there. Andrew

8 Cubes @ 33 Hz. Ports are 6 inch PSP-Inc ports. Andrew Andrew can remember the exterior diminsions on that box? And could you do another with sligtly lower tunning? Yea I can make anything you want. If you want go ahead and send me a PM with your car and what your looking for. Andrew

More to come in a bit. Andrew

Ohio gens are one of the best out there. Yes I did, I replied this AM. Andrew

Look into Ohio Gen alts. Andrew

http://www.stylintrucks.com/parts.aspx?category|category_root|-28=Performance&category|cat_-28|131=Brakes&canned_results_trigger=&partfamilyid=4579 http://www.stylintrucks.com/parts.aspx?category|category_root|-28=Performance&category|cat_-28|131=Brakes&canned_results_trigger=&partfamilyid=4567 Breaks!!! Looks like $3k for both the front and rear :/ Andrew

Just waiting on black carpet to come in! Andrew

Have you looked into the Carvewright or CNC Shark? They are not quite these large machines, but they may be an affordable alternative for you. I belong to a woodworking site and have seen several builds people have done to build their own as well, and some of them are amazing machines. I'm looking for something I can do nested based manufacturing on such as a Holzher or used SCMI. Andrew

We now have products in the Argent Audio Store! The first brand we have acquired is Stinger! Stinger has install accessories to do just about anything. We are slowly adding to the list. If there is a Stinger or any other product you would like to see just send us an email and we will be happy to look into it for you. Andrew

They are not shielded, I would think most people dont have tube tvs or CRT monitors any more. Andrew

Ok if you could try it again and let me know if it works. Thanks, Andrew

Ahhh Mark typo!!! I will change it soon. That cnc is one we rent by the hour for now till we can buy one of our own. $50k is not a little sum of money. Andrew

Yea, it does. I'm just OCD about everything looking fluid. Andrew

Ok for some reason it will not load 100% on a few peoples computers. Try and refresh a few times and see if that works. If not I'm going to have to do some troubleshooting. Thanks, Andrew

I was sitting in my room today and thought to myself, WOW I don't really have much for easy listening in here. So I came up with this, let me know if your interested so I can think about putting them up for sale: Simple bookshelf system consisting of: Vifa Textile Dome Tweeter Peerless 6.5 Inch Mid Maple Veneered Cabinet Binding Posts 100 watts aprox RMS for the pair. Dimensions would be: 14 Inches Tall, 8.5 Inches Wide, and 12 Inches Deep They would be sold by the pair: $375 ish is my best guess. Andrew

Yes I do, I just did not take pictures today. I will post up tomorrow. Andrew

Box and shipped today! Andrew

Port and more later! Andrew