Argent Audio

OMG I think it's time I work on this some more!!! As soon as this weather drys up I will be able to. What's next: Deaden floor with: http://stingerelectronics.com/productDetails.aspx?ProductId=541&CategoryID=12 (Damper) and http://stingerelectronics.com/productDetails.aspx?ProductId=548&CategoryID=12 (Mass Loaded Vinyl) Headunit: http://www.crutchfield.com/S-W9NWEbgGtQV/s_130DEXP99R/Pioneer-Stage-4-DEX-P99RS.html Need to run some new power wire: Going to use all Stinger products in this car. I think I'm going to go with Blue and Clear. Double 1/0 run from front to back Stinger HPM 3 RCA's for 3 way active Remote Wire Possibly a fan control system Going to use the Stinger 14ga twisted wire to wire up the front speaker and tweeters/mids Rear ground will be right to the frame I think Still deciding what front stage I want. The front stage is going to be super SQ oriented. I might have to modify the front door if I cant find some speakers that are good off axis. I want the imaging to be perfect. Thoughts ideas concerns... Andrew

Keep me posted and let me know if it works. Andrew

Sure do. I'm located in Morgan Hill. Andrew

Ok perfect. Your looking at $168 plus shipping. That price includes carpet. Andrew

The Seas has an impressive F3 and a very low Q which should make for a nice SQ system. I will always have a soft spot in my heat for Peerless though. I think they do better at Mids IMO. The Sees looks like it is the winner of the two. Andrew

I think there might be some stock floating around. If you want me to give Aura a call I know one of the guys down there; let me know. Andrew

That's going to be a tough one. Andrew

Here is what I came up with: 16.5 tall 22 deep 33.5 wide 4 cubes @ 33 hz I would suggest making a cardboard mock up to make sure this fits in your trunks opening. Andrew

What course of action did you want to take from here? Andrew

I just did 15 tall to see if you could work with that. 15 tall 17 deep 32 wide 2 cubes @ 33 Hz Andrew

When someone says SQ the first sub that comes to mind is the Aura NS Series. Andrew

To paint it matte black I will charge $45. So $120 for the bare enclosure $45 to paint Total: $165 Total with discount: $132 plus shipping. Andrew

I will drop it down to 14.75 just to be uber safe. I will revise the design shortly and post results. Andrew

Ok perfect. I will have a design by this evening. Andrew

I was just looking at what you wanted and 4.0 cubes it a large air space for a 12. RE recommends 2.2 Please confirm this is the sub you have: http://reaudio.com/specs.html#sp_xxx Andrew

Ok sounds good. I will get a design together tonight and post results tomorrow. Andrew

Yes it can. I'm very thankful I have a lot of family friends in the construction industry. Andrew

Ok I will get a sketch just to verify the port/sub position. I could put an extra piece on the back but I'm not sure mounting your amps on the box would be the best idea. Some times excessive vibration could rattle some of the components loose. Andrew

Just want to make sure you have one of the newest XXX that has the huge basket/mounting depth? Also you want the sub and port facing back? Andrew

I don't think there is anything wrong with your post. Why would you say that. I responded to your PM but I will from now on contact you via this thread as it is easiest. Andrew

Ok here are some things I want to get rid of! All of these items are brand new and never used! 4ft 10 inches of Stinger 1/0 Red. This is the uber flexible stuff etc! $16 Shipped 7ft 10 inches of Stinger 1/0 Clear. This is the uber flexible stuff etc! $24 Shipped Stinger battery terminal. $16 Shipped Stinger distro block. $10 Shipped 14ft 9 inches of Stinger 1/0 Blue. This is the uber flexible stuff etc! $44 Shipped 13ft 8 inches of Stinger 1/0 Black. This is the uber flexible stuff etc! $41 Shipped There will be more to come! Andrew

Ok what's your pay pal email address so I can send you an invoice? Andrew

Flush mount won't add too much weight since your just in daily city. You are located about an hour away from me if you wanted to come pick it up. I would just prime it, sand it and then paint it matte black. You might be able to see where the staple holes are since the bondo will be nice and smooth while the MDF is a bit more coarse and porous and will suck up the paint like no ones business. Andrew

Ok so subs up, port out the side of the box facing your wheel/driver side of the car? I have never received a request for a box design like this so I just want to make sure Andrew

Bump