BanginGMC

You have some in your ride? If so have any installation tips?

I doubt it helps, but i know if you have a pure plexi glass box it effects the sound waves, i wonder if carpet effects something.

Puttin an order in at Sound Deadener Showdown for my doors today! Order Includes: 16 CLD Tiles 1 roll Extruded Butyl Rope 1 sheet 1/4" CCF

I thought the same when i was looking through the pictures, then i saw this post and i was like HEY! lmfao. Carpeting the inside of a box effect performance any? maybe.. idk.. add a little more DBs if you know what im sayin'

I'm waiting for the post that says..

Should i use a Kinetik 600 Power Cell in my install for my front stage? -- Will it help with my voltage? OR! Will it strain my Alt? I know its only 400wrms.. but i have the Power Cell already. (2) Alpine Type R 6.5 component sets (1) Alpine PDX 4.100 KnuKoncpetz 4 gauge amp kit Yellow top as starter batt. 1/3 Big 3 done. (Batt to frame) Stock Alt -- 80-100 amp (not too sure)

The amp kit i'm going to be using for the front stage amp is 4 Gauge, so should i use 4 gauge for the wiring to and from the starter batt to second batt? I'm going to use a 120amp inline fuse for the 4 gauge amp kit.. would the same size fuse be sufficient?

An epic waste of money putting that many mids in there. Yes, overkill like a bitch.

Q 15 – We recommend using a sealed box in the neighborhood of 2-2.6 cubic feet of volume. Ported box we recommend using 2.8-4 cubic feet @ 28-33Hz. Again use 12-16 square inches of vent area per cubic foot of volume. Volume Calculator - Rectangular/Square Enclosures Subwoofer Enclosure Calculators, Fraction to Decimal, Parallel, Series, Port Length and Volume Calculators Play around with the dimensions until you get the recommend box size.

Yes thats correct, but if you don't have enough wire for the negitive run then dont bother and just ground it...plus you need two inline fuses, one located near the starter battery and one located near the HC600 Inline fuse connected to the positive wire, correct? Yes, one near the front battery, and one near the HC600. Thank you How would i calculate what size fuse i need? Anyone have a chart/ graph?

x2

Copper!

Yes thats correct, but if you don't have enough wire for the negitive run then dont bother and just ground it...plus you need two inline fuses, one located near the starter battery and one located near the HC600 Inline fuse connected to the positive wire, correct?

Put the little guy next to your hc2400 haha spice things up a bit. that wouldn't be a bad idea Glad i could help

Check out Subwoofer Wiring Diagrams It does the calculating for you, all you'll have to do is input the "Speaker Qty." and "Voice Coil Impedance"

Put the little guy next to your hc2400 haha spice things up a bit.

Yeah, i want it so it's always tellin' me whats good. I have to go with blue to match my PDX amp There is a new branch of PDX amps out and GOD DAMN do they look sexy!!!!!!

Items Shipped: (2) SPR-17S 6-½ Type-R Component Speakers Estimated delivery Apr 14, 2010 Item name: NEW ALPINE PDX-4.100 400 WATT 4/2 CHANNEL AMP AMPLIFIER Your package is on time with a scheduled delivery date of 04/12/2010. Product Name KOL-AK44 Complete 4 Gauge 4 Channel Amplifier Installation Kit Scheduled Delivery: 14-April-2010

I am planning on working it into my amp rack somehow, for the time being i have the whole ext cab to work out a amp rack, so space shouldn't be an issue. I am going to ge getting a Stinger Volt Meter one of these days, i have the spot to mount it as well. Thank you for the tips on grounding!

Hey guys, I was wondering if someone could take the time to "school" me on front stages, running three way set up, passive, active, setting the filters and gains of a front stage amp and other useful information that would help me in this hobby. -- Thanks Dom

Crossover as in the crossover provided in a component set?

Yes, no and i am not looking for tips and tricks on how to make mine better.. I am looking to find out what the following means, running three way set ups, passive, active, setting the filters and gains of a front stage amp.

I have tried looking for this information via Google, also tried looking for answers in audio terminology listing, as I am not a lazy POS.. but i've had no luck. *Not looking for a 8 page text response*