BanginGMC

Will work for an amp stable at 1/2 ohm mono correct?

My dog would go nuts on our trampoline when we put the sprinkler underneath it, it was bomb.

Model Solo-Baric L7 15 Size (IN.,CM) 15, 38.1 Impedance (OHMS) 2 or 4 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 89.4 Sound Quality 00.1% Frequency Response (Hz) 18-100 Mounting Depth (IN.,CM) 8-11/16, 22.1 Mounting Cutout, Square (IN.,CM) 13-3/4, 34.9 Min Rec Sealed Box Volume (CU. FT., Liters) 1.5, 42.5 Max Rec Sealed Box Volume (CU. FT., Liters) 6.0, 169.9 Min Rec Vented Box Volume (CU. Ft., Liters)** 3.0, 85.0 Max Rec Vented Box Volume (CU. Ft., Liters)** 6.0, 169.9

Well, if its 0.5 ohm stable it SHOULD be able to handle the stress..

first that comes to mind is Orion 2500 -- 1700 watts x 1 chan. @ 2 Ohms i know its old school

Will have to do thanks. So the big 3 and another battery would work fine then? Wont be able to answer that question until we know how many amps your alternator puts out i thought he said 105amps? but also know his listening habits would be good to know for example if he only pounds it on the freeway lol no h/o just what you got and the big 3 and call it day! but if he slams it all the time and at stop signs and lights! Oh, did he? lol i've been bouncing back and fourth from thread to thread haha I have 2 subs and 2 amps. So 1 amp is pushing 1 sub each sub is dual 4ohm so each sub is wired to 2ohm so each amp is doing 1000 watts rms so 2000 in total. To make everything clear lol. 105amps might be pushing it on 2krwm.

Will have to do thanks. So the big 3 and another battery would work fine then? Wont be able to answer that question until we know how many amps your alternator puts out

Check my signature, the company does great work and respects the wallet! He'll e-mail you prices and pictures of past work, he does neon lights, plexi glass, the works. Just ask you to notify them that i referred you Good Luck.

Wait.. a local shop that claimed they can "beef up a stock alternator" and it worked?? -- first i heard of this.

I actually emailed DC first and they said they currently have no alternators for my car. Try Mechman next!!!!!!! 3rd link down!

It's all good brother!

Home DC Power Engineering - Welcome MechMan - High Output Alternators and More DB Electrical Starter-Alternator I recommend DC Power over anything.

That link is to an ALPINE Mrp-m1000

Did Dustin ever get back to you on the Design?

Boxes are easy as fuck to make.. people think just because it plays such a big factor in this hobby it becomes X1345654321 harder, no. The design of the box is what makes it hard, not the constructing. *3/4 MDF, Titebond 3, Screws, Router/Jig Saw, Power Drill.* (Home Depot can cut your wood -- measure before leaving the store) In my signature, there is a guy that designs and builds enclosures, he can make you a design with a couple of 3D models so you can see the enclosure inside out and a cut-list which makes the job SO MUCH easier! He can add bracing, 45's, whatever the application calls for. Give him an E-mail and telling what you're wanting, equipment you'll be using, with the space and ride you have and he can take it from there and break it down to you with what you will need. -- I just ask you to notify them i referred you!!!! Electrical upgrade are NOT cheap.. but, thankfully with only 4-5kwrms (I advice you to push no more then 2.5kwrms to each btl) you won't need more then one Alternator from DC Power and a huge battery. BUT there is different routes you can take when upgrading your rides electrical system.. *I SUGGEST YOU BUY THE BIGGEST ALT YOU CAN AFFORD* You can get a 350amp Alternator and (this is where the options come) you can get a BIG FUCKIN BATT like a XS Power D3100 and use it as your starter batt and have that the only batt in your ride...OR...you can get a GOOD starter batt like a XS Power D5100/D5100R and then add a second XS Power D5100/D5100R as your secondary batt. XS Power Batts by SSA -- XS Power Products - SSA STORE DC Power Engineering -- DC Power Engineering - Welcome KnuKonceptz (wiring) -- Amp Installation Kits NOTE: Company names/brands added to make your search easy and fast.

Well if the "two ol'skool fosgates" are the same then he should use them and ditch the other one.

Pm'ed you.

No, but I plan on using the same suede material that I used on the sub baffle when I'm done with them. When you think you'll be done with them? I don't know for sure. I'm busy as hell with building another lowrider that needs to be finished by the end of next month. So for now I'm just working on the Caddy here and there. Here is a link to the other ride I'm doing. Check the build up and you'll see why I'm not done with the Caddy yet. LayItLow.com Forums -> G-Body frame wrap I'm working on.. Nice welds noticed from your from Michigan i lived there for 16 years. What city you live in?

May 20th+..... DAMN, that's a long time. Sucks for YOU! Hang in there dude.

They are different equipment made by different companies, companies don't try to match drivers with other companies. Put the two 12's you have and sell the extra one to the kid down the block.

Lookin' goood man I love the port color on that carpet. I seen your ad on CL.. looks legit.

Don't mix and match subs....

Owned Owned Owned Good luck with the next driver dude!!!

lolz