BanginGMC

cause they are cheap, duh... lol thats a good one bangin . while your giving people brain damage in yours , they will have tears in mine because it will sounds like angels singing . ha ha Hahahahah Jason and I got a good laugh at your reply If you need some help don't hesitate to ask, Jason and I will come by and pull an all nighter gettin' this done!

Douche bag /Thread.

it wont be damn so do i need to cut a new side for the box then????? Yes sir.

You can not save it, move to mexico and start a new life.

A car audio system CAN be very loud outside of the car its in.. also, it can be very quite from outside of the car its in.

You were trying to cut a straight line for a side of the box and you accidental curved a little, right? This is not okay because now the box won't be air tight and will have a leak. This will effect performance in a bad way. My suggestion is getting more wood and starting over.

Hey man.. why you using a flee market amp?....

Thanks chop!

Hell yeah Cory!!!! "What would will do?!"

Weird how?

Gain was at the same. FUCK YEAH! 154 son! hahah Thanks man! Bass did not turn my gain down. I think....the suspension was stiff so with little gain it hit hard and tight and now the suspension is loose so it needed to be turned up? ..not realistic but only thing that comes to mind.

What up doe! -Detroit.

So there was no real issue... we just turned the settings up (really odd.. idk why) and i'm not only just as loud.. i'm louder 152.6!

My D3100 is damaged, it looks like someone dropped it. Will this effect performance?

My (2) SAZ-3500 get hot, really hot. Is this common in this amplifier? My Voltage stays around 13.5 on full tilt, and sometimes it'll go to 12.7 on long continues bass notes when on full tilt, when not on full tilt it's 14's. I got a 320amp Alternator from DC and (4) XS Power D3100s as secondary batts. Thanks Jacob

I cannot tonight, but tomorrow after work i can. Thanks mark! No settings have been changed.

I'm getting 3 more XS Power D3100s, but now instead i'm thinking about 2nd Alt. I just want a response from Jacob lol

x2 or your amps are set correctly causing them to turn the excess power that its trying to make into heat. How are your amps set, whats the pre-out voltage of your headunit, how high are your gain settings? My amps are already hot when I get in the car and get pretty hot depending how hard im pushing them and how long, just like any electronic piece of equipment after use its temperature will rise subtantially and if the air around it is not cool then it will just add to it. If worried about change listening habits or turn the gains down some. Even though I know you guys barely have winters but wait till the temperature cools and if you keep your setting exactly the same your amps will be way cooler. Pre-out voltage for my H/U is 2v and Gain is little below half, with gain control knob at half.

You say shut off, but do you mean protect or literally powered down? I've gone into protect while competing.. but i think thats from low voltage. I've gone into protect driving around too, but thats when i get caught on full tilt at a red light, also believe that's because of low voltage?

Okay, my brother picked up a JL Audio 1000/1v2 This thing has so many filters/settings it's very different from my sundown. What do they all mean? I've never messed with an amp with all these kind of settings. "Q" Center Freq Infrasonic Freq Filter Freq Mode/Slope -- Off/12/24 Input Voltage -- Low/High Input Sens

I'm not 100 percent sure it has to do with how they are installed, it might be.. but they're not as close and cluttered as the picture of them in the cab might seem.. this is why i'm asking Jacob if its common to get hot. p.s. i want new seats and steering wheel.

Subs are dual 2, amps are strapped at 2ohm My saz1500d gets pretty hot as well, but part of it is our heat... If I touch my amp in the afternoon and it hasn't been played that day, it's still hot to the touch... Same for me, but after playing for an hour or hour n 1/2 it gets so hot i get worried its going to break.

Not luke warm, if they only got warm i wouldn't of made a thread. They get HOT as hell and i would be in pain if i kept my hand on them for a long time. I wish i had a surface temperature meter so i can know exactly how hot.

Email sent.

Do you guys make a decent size AA sticker? I'm looking for like... 12x12 ..anyone know of a place?