Eldorado

...I have 3 12" subs and no enclosures for any of them ....My first subs are sitting on a shelf in my garage ...No equipment is useless, everything has a purpose. .....I have a whole tool box devoted to car audio stuff. ....My tool chest has more car audio stuff in it than tools. ....You have spare MDF on the side of your house incase you need to make an enclosure.

I spilled my spaghetti all over my pants. sauce everywhere And Jack Nicholson called me today, he wanted to ask me a personal question so i hung up. I shoudve said, no wait, lemme ask you a question... Who is your daddy and what does he do ? HAHAHAHAHAHA my arnold voice sucks cuz my nose is plugged.

Its only going to be 1.3ft^3 If i dont like it then i'll just cut off the snd chamber and put a new side on.

Has anyone done one of these before ? I reciently picked up a eD e8a and I wanted to try it in one. I found a formula that seems fairly simple to follow. Build a box with 2 chambers, one at 3 cuft and the other one EXACTLY half of that, ie 1.5 cuft. Next cut 3 ports all IDENTICAL in length. Put one in the face of each chamber and the third in the wall separating the two chambers. In this instance each port would be either 12.5" long for a little deeper response or 8" long for a little more SPL. Now you have a box with a big chamber with a vent in it, a small chamber with a vent in it, and a third vent in the wall between the two. The woofer also mounts in the large chamber. The way they work is that, at low frequencies, it all functions as one big box with 2 ports, and is tuned to 30Hz (12.5") or 35HZ (8"). At higher frequencies the middle port starts to restrict air movement and the second chamber begins to act more as a resonance chamber but not as part of the box. At this point a second tuning frequency develops 1.9 times (almost an octave) higher than the lower one , ie. either at 57Hz (12.5") or 67Hz (8"). This is similar to a vented bandpass but has more output and smoother sound due to the woofer not being tucked inside the box. The results are that it plays both low and loud, while being relatively nice sounding. The drawback is the box size.

i went to bed at 4:44, woke up at 9:53

Yes. Im sorry but i wont throw out some money for a product without some specs. Thats like saying" oh ya, this car is super fast" and not telling us the HP or weight of it. I saw Duhluzions's site a couple days ago NO ONE posts there. If you dont want to be a part of ca.com, dont go there Dunno about the trigger thing And shame on you for bringing that ca.com stuff over here ! P.S I think i put chinny in the red for good.

* thread has been reported to the moderating staff* Obviously you have nothing better to do

Is clean !

ABC news is now regularly in HD It doesnt look like real HD but its better than it was.

Brad nailer> you lookin good so far

a 4000D pulls more amperage than that.

Sometimes you just have to let go mike... P.S You could just make holes in the bottom portion of the gasket, not the top. So it looks like 6 holes but when you pull it back there are 8

alts, pffttt How many batteries would you need !?!?! Cant have the car on in dB drag

Honestly, some silly gasket wouldnt turn me away from buying one. And you could always send them ouy when you get them. Its not like the woofer needs it, its cosmetic

Vladd, put some egg crate foam behind the speakers, you should notice a difference.

If you dont take pics you will get a 1 day non pic posting nban

its 1/8" off but the cuts are straight

Anyone see the news ? Prison riot in the castaic prison. Its only like 5 miles from where i live.

Fake Canadian !

A nice sounding sub. Actually, ABC's are less peaky than a ported enclosure.

I think we should have the rep system. Everyone would have like 10 bars

Any pics ?

http://www.soundsolutionsaudio.com/forum/i...wtopic=5257&hl= check it out guys.... I made a thread

impedance rise is a █████

I didnt know ohms changes SQ