The enD

Re-arranged my PC desk and speakers, and holy shit, some much more bass. I can't believe I've been listening to it this way for so long.

It's great for trolling tho.

Fucking DST, it was 2:50 just moments ago, now it's 4 AM and some.

Thanks, Sean. Wish the 35Hz stayed a bit longer on the classical version you see on videos(number 3) to match my setup. You should put your music in your signature.

The whole watts/voltage=amps will work, if there is 0 voltage drop and the amps are 100% efficient. Which is not the case. For the current setup even, if he upgrades the alternator, 1 run should be OK. If money is not that big of a problem, go for 2 runs, 4K is a lot of power and you should definitely get a better alternator and do the wiring properly. But with a stock or ~150A alternator , 1 run is fine. You are going to have a battery next to the amplifiers too, not all of your charge bank will be up front. What I would personally do: Get everything wired up and crank it up(maybe a sine wave, so the voltage stays the same through a longer period of time). Measure voltage at the front - both battery and alternator. Then measure what the amplifiers are seeing. If there is a good amount of a difference between the back and front voltage - you have voltage drop. Then you can upgrade the wires.

1 run of 1/0 from front to back. 1 run from battery in the back to each amp. 2 is overkill Don't use 1/0 for big 3 - the distance is not that great and a thinner wire works as good.

Just get something like 150-200A, if that blows, get even bigger one.

http://www.sounddeadenershowdown.com/

I have no idea yet, but I'd like one for some fun project.

Explain Check Don's website. The knowledge is there.

You should check Don's website for info. That is not an effective way to deaden.

http://imageshack.us/

I've moved it in the engine bay, don't worry.

Update on the doors Cut them up to save some space in the front by doing some relocations. Glued back on Fiberglassed the original panel to the ported enclosures Covered some parts of the wood and fiberglass with foam for a softer feel when I cover them up. I'll start sewing the fabric soon and then wrap. Should also invest some time into a grill made out of plexy, lit with SMD lights.

Can they be downloaded somewhere?

I am digging than you are digging it.

White stuff is foam.

That won't be too hard to wrap with texture, right?

Hmm, they have some similarities to the stock ones in my car. Adjustable shoulder support ftw!Ok, that they don't have.

Hmm, they have some similarities to the stock ones in my car.

Reinhardt play? I dun get it.

"Django Unchained", that's a good movie, nigga.

So if I get one of those remove keys what happens to the original key? How does the whole transformation go? What about the different positions of the key in the ignition - off, acc? I know you can just put a button and start with it, but you still need the key and all the fancy features(no more key carrying, self locks when out of range) are gone.

Obviously

I might steal some ideas from the Rossion interior.