aimone

yeah rf's only subs worth getting are the power series like the T2 or the older power hx2. id tell him get a sundown 8 them cute lil subs are monsters

yea i'd say rca's is most likely the problem......but make sure ur grounds r tight before you replace the rca's

word ssa is the coolest forum i been to....... every other one ive been on everyone is a dick. termlab was the only one halfway decent until i found this forum.....other than a little sarcasm everyone is great and has givin me all the help i've ask'd for hell i check the updates about 5 times a day on here sometimes more if the ol' lady and bitchin

big 3 will help.....i was at 14.0v at idle and it would drop as low as 10v-9v...i did the big 3 and at full tilt idling at a stop light the lowest i get is 13.6v...and driving at normal speeds(40mph) i stay above 14.0 thats with stock alt and a cheap battery

so your a female right? that is so awesome a chick that is a basshead and gonna wall off there truck.....do u have a sister? lol jk

title says it all what do u guys think? im just asking for shits and giggles......the biggest baddest ive seen personally is an atomic apxx 18......i can buy it for 500 maybe cheaper after jewin him down not even broke in yet

i suggest ditching the amp u got and get a sundown

the treos will sound great i had two 15's the same model in a ported box good sound quality

im a big treo fan. my first real setup was 2 treo te series 15's in a huge ported box tuned at 45hz. very hard hitters for the bullshit amp it had..honest oppinion u would be more satisfied with 2 15s rather than 1 12. but i've never heard any aa subs so i dont dunno the sq but treo's have good sound quality.

im interested in the bracing info too. i took my box apart to change the tuning on my port and had like 5 of the 20 screws ive taken out so far are snapped.

so since u didnt exactly answer my question is the seamless look on the box from sanding and paint? its awesome looking like it fiberglass or sumthing really nice man

not really looking to buy anything guys just wanna see sum super beastly subs.....read the first sentence of the thread i said "for shits and giggles" ive got a rockford fosgate power hx2 15 now and im happy with it.....when i do upgrade it'll be sumthin from this site

ok thanx guys now i just gotta figure out how how much to add or remove to/from my port length so i used the re calculator and adding 1" to the width of the port and taking 7.5" out of the length put me tuned at 40 hz so imma do that today and see how it sounds

ok so i have a bazooka 500wrms mono im running until i get my saz-1500 fixed.... its running a fosgate power hx2 at 1ohm. its a damn good amp for the brand. i dont know much about it but lately since i got a h/u instead of my mp3 player it goes into protect when the bass hits real low note like on bass i love you for example the real low note when u get major excurssion it goes into protect. is it cause its not 1 ohm stable? gain is about 2/3 up frequency is all the way down bass boost is about 1/4 up sub level on pioneer 680mp is at about -10 thanx in advance

ya done that and to much b.s comes along w/ google so i thought why not ask people with expierance

i listen to rap/hiphop-i.e. rap gucci mane, jeezy, stuff like that and real hiphop stuff like atmosphere, sage francis, immortal technique.... and occasionally some metal like slayer and dethklok

well sorry.....u knew what i meant anyway......which was highest power handling......just answer the question or move on down the road instead of bein a dick......i just wanna see or learn of sum crazy subs i havent heard of. im sorry im still learning audio terminology and wasnt born a bass genius

how exactly did u achiev that seamless look? cant see screws or nothing i like that

ok once again the amp isnt turned up very high only thing turned up is the gain and its a lil over halfway. and as far as trashing it from heat i could care less it was free and i have 2 saz1500's gettin repaired...... ^^^^didnt mean to sound like a dick above ^^^ m3. . . . i like the lows because of the feel and the pressure so thats why i tune low..........my last setup was 2 treo 15's in a big ass box tuned at close to 50 hz and it slammed really hard. it just didnt hit low's they sounded nasty. this is gonna be my first setup with all "Real" equip .my electrical could be better other than that there will be no junk equip. im goin for crazy airflow and flex just to show off with. ill go for SQ next setup when i get board with this one. if i decide to keep it in the back seat and seal between the cab and trunk how should i face the sub and port ?

yeah i love the lows it hits but the lows is all that really sounds good. 37hz was an estimate what would you recommend to be tuned at for a little higher response while still hitting lows? i really dont know jack about ported boxes. here in oklahoma most people i know use prefab ported or sealed boxes so i could use the knowledge. amp is doing ok now until it gets hot i only gotta deal with it for another week and ill have the sundown goodness lol

its tuned at 30 hz.....its 4.6 cu.ft w/ sub and port displacement the amp does not have subsonic just gain, frequency, and bass boost knobs im building a new box tuned higher like 37hz w/ kerf port and double baffle

yea i dunno wut the output voltage of the mp3 player is but the h/u is 4v and i did readjust the gain and boost when i hooked up the h/u. now boost is all the way down by low i mean low like i said earlier the lowest note in basstronics- bass i love you or the lowest in jeezy's - put on

ok i turned the bass boost all the way down definately sounds better. my ol lady dont like it loud as shit like i do so havent got to test the lows yet today. electrical wise i have brand new stock alt new $50 battery big 3 i have two volt meters the one on my h/u doesnt drop below 12.5 cranked on lows and the other one runs at 12.8 cranked on lows. so i should be good there but i think cable guy is right about getting to hot to quick while running 1 ohm ive been running this amp at 1 ohm for bout 6 months no problems until i got the new h/u i think the bass boost had sumthing to do with it too. so when i get my saz1500 back the only things i should adjust are the gain and the lpf right?

ill post a pic of the guts when i get home they suprised me when i opened it up. but i know its not turned to far up cause ive had it turned up alot more and it never shut off.

is it possible to get the diagram of the board layout?