Electrodynamic

Nah, Jake wasn't there for the build. 34 is just fine for daily. Loyd's car is tuned close to that and his F3 is ~22 Hz. Transfer function is a glorious thing, and tuning around said anomaly can yield very good results.

Yep, the 'ol teggy is in the background rocking the SQ side of things. I wanted him to do 10 10's but he opted for 8 12's. BTW: That was Sean with his crack showing in that one pic, not Hoss. Hoss should be in a street class since he technically is below the windows and doesn't have a wall. When it's all over with he will have two alts and two batteries though, so I'm not sure where they will put him. He is tuned to ~34 Hz in ~20 cubes before port and driver displacement.

We are going to do more adjusting on the x-overs this week and also work on deadening his roof b/c it sounds like a buzzing tin roof when the subs get going. Within the next few weeks we are also going to make trim pannels to clean everything up so it looks good. That truck is just nuts. Crazy loud...just crazy loud.

Fiberglass enclosures do cost quite a bit so be prepared to shell out the casssshhhhhh if you want one.

10 inch and 12 inch pics. Enjoy!

They are located in a secure facility.

Nope, we only re-cone our own drivers. BTW: This should have been emailed to us and I am closing this thread (it is stated clearly in the rules of the SI forum).

Sweet review. I love the SAZ 100x2 amp I've got now but I'm replacing it with another offering from Jake this week (more power). Two humbs up for the SAZ 2 channel amp and the sub amp. There are a lot of reason's why we recommend them on our Mag's.

The BM's are our mid-line driver and, like Ryan said, are only available in dual 4 Ohm. The Mag's are dual 2 Ohm only.

Didn't get your email, but I got your PM about your email. I just worked on the Mag web page - updated and stuff - and will now go out riding for an hour or so and then return to work on the BM web page.

You can stop by the house if you want Chad, but the subs aren't here. I could pick up a few for you to look at if I know when you're coming up. BTW: Hoss didn't help unload. That'll add $20 per driver for him when he buys. And today was one hell of a long day.

They will be in our posession by the end of this weekend. Saturday is the pickup/delivery day.

Sweeeet. And Loyd's coming down tomorrow!

The 2 15's won't be noticeably louder than what you currently have...until you get below 30 Hz, then the two 15's will romp all over the single vented 15.

Probably not. We still haven't received the Tara Labs wire that we sent out months ago. I'm not letting another item leave our place due to that, and also due to the condition of the proto Mag when it came back.

Haha, they don't have the Mag motor. They look big though don't they?

The surround is smaller than the Mag's. The 1" surround on these drivers offer everything we need out of a surround, where as the smaller surrounds just wouldn't cut the mustard. I suppose we could have lowered Xsus by down-sizing, but where's the fun in that. And the 10's just look awesome IMO.

The ported enclosure recommendations for the claw Mag's are the same as our new Mag's. 2 cubes tuned to 27 or 1.5 tuned to 32 (although I strongly advise against the smaller box). Search on this forum for port area, other enclosure/tuning ideas, etc. It's all over the place...just gotta look a little harder.

The Sundown amplifier mentioned above coupled with any two of our BM's will be a solid performer. If you are looking for the closest thing to a Mag setup, the 12" BM's are where you'll want to look. However, the 10" BM models look SOOO damned good they're going to be hard to resist.

Sorry to hear that Brandon. You know that I've been there, done that. The cops will probably be absolutely NO help what-so-ever so don't count on them doing anything about it. If you find out who did it I'll make a road trip out there and help you take care of the problem.

Gotcha.

Probably the only place you can order Mag's online, www.low-hz.com.

Chad, everyone likes your pretty pictures. Now I'm closing this thread.

Hey guys, take this to PM's and/or emails from now on please.