topgun

The second one is complete, have to wait till I move them to get pics of the pair. It looks like a barrel cart is going to be the best option to move these coffins.

Top for me!

They get loud off of an old junky Rotel receiver with the volume on 3/10 and I don't think it puts out that much power anyways. I only had the FM radio to listen to stuff on though, didn't have a CD player, couldn't find my MP3 player so I was stuck with the rado. Still has some serious low end though

Its 2am now, been working on the BIB's since roughly 1am, got the second one all glued up and its drying in clamps now, have to cut the front baffle and glue it on and it'll be ready to go (minus some polyfill that I currently don't have).

If the voltage drops low it will lower the power output, but if it drops to low theres a good chance of your amp becoming a paper weight.

As long as your voltage dosen't drop low you won't fry the amp. As for the speakers, as long as you keep your head out of your arse you will be able to tell when they are screaming for mercy, if they do that, turn it down.

Currently I have no plans for finishing. That is the part I hate the worst about building anything. It might be stained, it might be painted, it might be carpeted in fake fur (not joking about this either), or it might be roll on bedliner. Haven't really decided on it yet.

Pics up in the home audio section for anyone who needs to kill some time.

Got one of the BIB's done, waiting for the glue to dry on the front baffle then going to stick the 12" in 'er and try it out. This thing is fricking huge, and now I don't know wtf I'm going to do with it. I'm begining to question my sanity Uploading pics now and making a thread so be onthe lookout for the pics.

Thanks for the info Ryan1!

Throw 2 sealed MAW 15's in there. One sealed gets LOUD in my basement off of music....

Working on the BIB's. I'm about 3/4 of the way through completing one of them, these things are HUGE. Going to take pics of them too for you Tom.

Anyone got some extra power/ground wire laying around? I need to rig my USA-400 into a truck for a parade and I don't have any wire for it. This is a temp (~5hr long) install to power my big arse BIB's in the back of a truck. So I need 15ish feet or something of power/gnd wire, probably 4ga or thereabouts. Anyone got any?

Ok, got a question. What is the point of HD-DVD and Blu-Ray DVD? A good upconvert DVD player will upconvert to 1080p standards and isn't that what HD DVD and Blu-Ray play at? So if you have an upconvert DVD player that'll do 1080p wouldn't having HD or Blu-Ray be a pointless gesture?

If all were running at the same time it would be one hell of a fuel bill, but there is never more than 2 or three implements running at one time.

Roughly 144 cylinders, all in vehicles that run and move, I probably forgot a couple here and there but its close.

Extremely Sexy.

Thats all I can think of off the top of my head.

*not in order* 94 Chevy Astro van, 03 Chevy Astro van 89 S-10 90 Chevy 1500 69 Chevelle 92 3/4HD Chevy 82? 1/2 ton Chevy 80's S-10 04 3/4HD Chevy 4010 JD 4030 JD 8100 JD 3020 JD 4240 JD TeRex loader 6-71 Detroit TeRex loader 4-71 Detroit JD Scraper 6-71 Detroit 89 Freightliner, Series II Detroit 93 Freightliner, 3406B CAT 80's? Fuel truck late 70's model Chevy chassis Feed Truck, 366 Big Block Forklift, straight 6, side draft Webber carb

Add on another 6 for the forklift that I forgot.

Only 4 of them are things that don't move.

Forgot 6+6+4 Two 6-71 and a 4-71 Detroits.

6+6+6+8+8+8+8+6+8+6+6+6+6+8+6+6+6+6+6+8+8 Thats about all I can think of right now...

Shall I start couting the cylinders we have here on the farm??