Maggotpuffin

I do have the kx series why?

Ok thanks for the detailed instructions ill try it today if i get the vhance. The one i heard was the real cd but idk how big of a difference that makes. And kickers new stuff the zx series is 2 ohm stable but the kx series the one before zx was 1 ohm stable and were better built in my opinion. I wouldnt put kenwood pioneer and kicker in the same category though.

Ok thank you so now i know which one to turn it to but which number under that V~? and heres an example shoulder lean by young dro that whole song used hit hard on my cvr 12s i used to have and on my L7 15 the beginning doesnt sound deep. Like flat i syppose. Ill try wangsta i new a system a while back that that song sounded good on it was two type e 12s. Btw i have a d2 wired to 1 ohm being pushed by a kx1200.1

Well Google and search can be your best friend in life if you chose to use it (I got plenty of tips and help on using the DMM) plus there are plenty of people on this forum who will lend you a hand you just have to ask. i googled it none of them helped with what i dont understand i cant figure out the setting on the knobs like what each turn means. I know ohms but thats it

I have a dmm but cant figure out how to use it

i mean like the notes dont sound good they seem like they should hit differently. My gain is set around 3/4 of the way. My amp does have a subsonic filter but it only goes on or off. Some songs like run this town by jay z. Some songs even on cd sound weird but maybe thats cause they are bootlegs. How can i check if my box is completly sealed up tight? Would the real like storebought cd sound better? All opinions are appreciated

My L7 hits some songs weird like run this town by jay z is it my sub my box or wat its tuned to?

Alright heres what i have. 1 Kicker L7 15 Dual 2 Custom Ported Box 4.44 Cubic Feet Internal After Port And Sub Displacement Tuned To 34 Hz Kicker Kx1200.1-1400 Rms Alpine HeadUnit KnuKonceptz Kolossus Fleks 0/1 Gauge (About To Order) KnuKonceptz Krystal Klear Subwoofer Rca's (About To Order) Sub Is Firing Against The Rear And Port is On Passenger Side How Does That Setup Sound To You? I Know The L7 Isnt The Best Sub For Spl Or Sq But I Like The Way It Sounds. So Thanks For Your Opinions

Hey i have an L7 15 too bro ive got mine in a 4.44 cubic ft internal ported box thats tuned to 34 hz and its ridiculous! I love it. I can send you my measurments if youde like as a guideline for your box

I say i have never even wanted to sit in a geo metro until i saw your brothers. Paint the car black and get some rims and im in love

Ill get an amp if i find a good deal on one. I just want a loud clear cheap mid/high. I didnt see your sale post im interested email me. [email protected]

Ok just an update i ordered the wires i got two 0 gauge fleks kits 1 for my amp and 1 for big 3. Then klarity rcas

Im Helping a friend design a box he kinda wants a half wall. Two subs inside the cab ( no rear seat) and two in the trunk area. My idea is 3.5 cubic feet per sub about 55 cubic inches of port per sub. It will b one big box but inside it will be like each speaker has its own box and they all have their own port. So i suppose 14 cub ft internal after sub and port displacement and overall about 220 cub inches of port how does that sound any advice is appreciated. He has none of the equipment yet but he wants 4 cvr 15s and for power either two kicker kx1200.1 or one zx or kx 2500.1?

I know what you mean if i were him id probably get 2 fi bl fully loaded 12s or 15s but hes stubborn. he wants what he wants

Ok ill have to find a place that sells the kit. Thanks. Any suggestions on a decent cheap set o f mids? The ones i have hooked up arent very loud.

Ok ill have to find a place that sells the kit. Thanks. Any suggestions on a decent cheap set o f mids? The ones i have hooked up arent very loud.

He just wants to do an all kicker build actually im the kicker fiend out of all my friends. I love their products

He loves big systems!!! In an old cutless he had 8 10's. He said he wants minumum of 3 15s

So just buy the kit and screw and on and bam no more rattle? Thanks for all your help jaycee. Im feeling confident about doing the big 3.

Ok thanks i think im going to get the kinetik hc1400 if i need a second battery. It supports 1400rms. Are kinetiks good? Thanks . And also does the dynamat license plate really quit rattle of the license plate?

Alright thanks so i read another post you chimed in on so if i get a second battery i shouldnt get an isolator? And i read somewhere its better to get one big ass battery for under the hood instead of 2 is that true?

Thanks jaycee i have a feeling your getting irritated with all my questions lol. So would my stock alt support another battery? And i did the gain equation and got that number to but i couldnt figure out how to use the dmm so i said screw it and turned it up about 3/4 of the way

I still have my stock alternator im going to be be ordering 2 0 gauge amps kits from knukonceptz its the fleks type. One is for my amp and the other one is for doing my big 3. One question ive read up on how to do the big 3 some but how do i connect the wire to my alternator? And will the big 3 be enough for the little bit of dimming i have? If not should i get a battery for the back? If yes will my stock alternator suppport it? Thanks

Can anyone answer my question?

Ok ill try rewriting it. The setting gain correctly Post said To figure out what voltage you should set the gains to, multiply the RMS power of the amplifiers output by the impedance of the speaker. My speaker is dual 2 ohm i have it wired down to 1 my amp is 1400rms. I need to know what impedence to put into the equation. Thank you i know what im talking about besides big 3