mebcop

Hey guys, I'm finally biting the bullett and putting some bass in my 2012 Mustang 5.0... It has the shaker 500 system, but I def need more thump. My available dimensions are 38"W x 15"H x 11"D Those are the Max dimensions for the space I want to take up. It calculates out to 2.7ft^3 using the max dimensions. I am trying to pick between 3 10's in a sealed box, or 2 12's sealed, or one 12 ported.... I initially wanted a single 15 sealed but I just don't have the height as my MAX height is 15" for the box. I will be powering it with a Hifonix bxi1610d (1600wrms@1ohm). I have been looking at 3 10w3v3's, or type-r's, as those can both be had fairly cheap online. Any other suggestions????

Yes king alpha, I made a cardboard box to that dimension and I can get that in easily... Good looking out though, I'd have been pissed if I built it all and couldn't get it in! Haha. Thanx

Your prob right DeYoung... Neither setup looked very "quality" oriented. I'm pretty sure I'm gonna want more than a single 10. I have a re sx 12 that needs a recone. Maybe I should try that in like 2.0ft^3 tuned to like 35hz.... Don't have the space for a long port for lower tuning while still having the slot port at least 2" wide ....

I've never heard an IB setup that was clean enough, nor loud enough.... Bandpass? Did u look at my available dimensions? Haha.

Oh, don't worry... It'll look clean . Stealthbox makes it hard to get my clubs in the car. I'd be banging it and scratching it.

whats the "black and blue" sale?

Oh, and I should have mentioned this at the beginning. The sub will be firing into the car, sealing the cabin of the car from the trunk. There's about 6-8" between the rear seats and the sub when the seats are up...

Thanx guys. Do u think a single Q would be enough? I don't need "rattle the teeth out of your head" loud, but I am fighting a moderately loud exhaust.

Fit and finish of the turbo kits isn't quite what I require for my car... Yet. The roush s/c is putting out some REAL nice numbers!!! Prob run about 9psi and be in the 600whp ballpark.

Thanx Steve Any suggestions on what sub setup I should run? The more I think about it the more I'm leaning to a good single ported 12....

It has a JLT intake, Borla Touring exhaust, and the 93octane street tune from Jon Lund Gonna supercharge it either this winter or next spring... Oh ya, and FRPP K-springs 1.5" drop

It's Lava Red...

My goals are loud but sound good. I will sacrifice spl for sq, but I need it to be fairly loud. I'll be using my hifonics bxi1610d I listed above. Budget will be between $300-400...

What? 3 tens sealed? 2 twelves sealed?

Hey FI... I am looking to order a recone kit for my RE SX 12, and I have a couple questions... How long does it take to make/ship a Dual 1 ohm recone kit with a red FI logo? Does it matter what coils are in it right now, because I don't know what they are, neither of them are any good so I can't test them? Thank you

Hey guys, just trying to get an answer. I just bought a blown RE SX 12 off of a guy, and I saw on youtube that someone had an RE SX 12 reconed by FI. I am VERY interested in getting this done to my SX, and I've sent a few emails over the last couple weeks but FI must be really busy. I was hoping to get an answer to just a few quick questions. 1. What options do I have on a recone of a RE SX 12? 2. What is the turn-around time on a recone? 3. Price on recone and options? Thank you guys for your time! Brian Mitchell

Don't worry, I see how it is

Aside from a death in the family of a very close relative and 3,000 other things going on I am deeply sorry I am not here at your beck and call 8 hours a day. It is a 15 second question that I can not answer if I do not have the information to answer it at the time that I am here, now that I have the information that I needed and I am here I will answer your question. Shipping looks to be about $32.23 back to you. Thanks, Nick Wait a sec... it took NINE days for you to tell me that you needed my zip code, I gave it to you THAT day, and now it's THREE more days later that you're answering me.... but it's MY fault that you couldn't answer the 15 second question... like I said, thanx anyway It's really too bad, I REALLY wanted an FI reconed sub, I just can not get myself to ship something to people when I can't even get a hold of the person.... It's the type of business where after waiting 3 weeks to get my sub back, and being frustrated beyond belief because I can't talk to someone about it, I finally get a post saying somethings on back order or there are family problems..... Sounds like your business has you in over your head, maybe it did a lot better than you thought it would or something, but I was serious when I said be prepared to lose a lot of customers because of the lack of communication!!!

ya, no kiddin!!! They keep saying "we're busy".... well, you're not gonna be for long when people start getting sick of not being able to get a hold of you! When u emailed them did u make sure u a topic in the top of the email? because if u dont it could go straight to junk.... Yes I did.... plus, simply this thread going on this long with no answers... They posted in it, but still didn't answer my questions... Guess I'm just looking for a company with a little customer service.... thanx (and don't go on for the next 4 pages on how great they've been to you, they haven't to me, so I don't care)

ya, no kiddin!!! They keep saying "we're busy".... well, you're not gonna be for long when people start getting sick of not being able to get a hold of you!

12953.... it's malone NY I'm just looking for a total price for everything please and turnaround time... I know you're busy, it's just really tough when I can't talk to anyone, it seriously is a 15 second question that is taking weeks to get an answer to.... Thread was started 9/2/09 and it was asked there... Not trying to be a jerk about it but just defending myself against: "Sorry I don't sit on the forum and wait for people to post questions, entirely too busy for that. I am only on here one time a day if that. I haven't been on here since yesterday morning when you said you wanted to send it in."

..... nevermind wow

I did not order the recone kit.... I was just trying to get a price quote and turnaround quote for my RE SX 12.... that's it. Nothing has been ordered, or shipped anywhere, I have a blown RE SX 12 and I am interested in having FI recone it for me, I just need a price quote for everything being done and shipped, and I just want to know how long it will take. Thanx

Actually, I need FI to do it.... It's worrying me a little though if I can't get a hold of them now, I don't know if I should send my sub in... I am not trying to slam FI, they seem to have GREAT products at what seems to me as GREAT pricing, I just need some info and I can't call them or get a response