krazie

what do you mean take that beating?? as in its gonna be 2 loud? if thats the case ill rip out the back seats if needbe for that woohoo!!!! anyways im off back to work got the trunk hatch and doors left to do... my hands are all cut 2 hell alrdy tho

NICK I GOT THE SUB 3 DYAS EARLY!!!!!! anyways i got all my deadeber 150sqft waiting on the liquid... but im starting the install alread... but i ran into a problem my cousin isnt gonna bebale to come down and make the box... so i needa make a ported box for 2 12"s or should i just go sealed??

it about 1.7 cu I AM A be getting custom fiberglass on it when my cousin comes down and i install my 2nd sub ^.^ ill see how it goes ... I AM A try and port it if i have the space... only prob is 80-100amp alts http://www.cardomain.com/ride/2271975 has updated pics

yea I do on monday ups should be dropping off my other mag so I AM A run my nine.1 at .5 until it blows then order a new amp probably... but im holding off for now because my alt only puts outs like 100amps and im debating on what exactly to do, no1 makes amps for my car so i have to wait until i can have custom brackets for a universal one made or sumtin.... And thanks 80inches i losted that video somhow my dumb deleted it from my host then i formated my comp ^.^

Ok well right now i have 1 12" mag running of 1200watts I will have another sometime soon i hope, just bough it Now i won't bebable to buy my new amp for about 2+ weeks after I get the mag and they will be wired diffrently i beleive also so... Shouls i just push my nINE.1 to the max and wire it for .5ohms and run both my mags off of it or just keep the one, im woundering if my 1 mag with 1200w sealed will compare to 2 mags running off a little over 600.. the 2 will be sealed 1.7 Cubs each sub probably -Thanks-

cuz im pissed at ED atm i was gonna order another nine.1 and some edead and wires and strap em i couldnt because everytime i'd add wire to my cart it would screw up... so at this point i think I AM A blow my ed to hell take pictures and be like oops buy a new amp and go with second skin deadening

Well if it will last a week or 2 I don't mind Ill probably just get my box built and all and hooke it up for a week or 2... my cousin is coming down outa state to help me build a box and fabricate brackets and stuff to install a new alty.. ^.^

Will 2 12' mags work fine with a Alphasonik PMA1200DA - Alphasonik 2470 Watt Mono Amplifier * Low Frequency response: 5 Hz * High Frequency Response: 250 Hz * Built In Crossovers: Yes * Channel Separation: Yes * 1200 watts x 1 @ 4 ohms mono * 2000 Watts x 1 @ 2 ohms Mono * 2470 Watts x 1 @ 1 ohms Mono * Dimensions: (W x H x L) 9 1/8" x 2 1/2" x 20 7/8" * Bridgeable with Second Identical Model * 3' Modular Cord Included * Hour Meter * Remote Mount Digital Voltmeter(included) * Remote Mount Bass Boost Control (included) * Heavy Duty One-piece Extruded Aluminum Heat Sink * Beveled Clear Acrylic Protective Cover * Tiffany-Style Input and Output RCA Jacks * Parallel Line-out RCA Jacks * Removable Covers Conceal Control and Terminal Panels * MOSFET High Speed Switching Power Supply * Internally Mounted Fan-Cooled Power Supply * Solid Brass Nickel-plated Terminal Blocks (4-gauge Power, 8-gauge Speaker) * THD: 0.05 * Signal-to-Noise Ratio: >100dB * Frequency Response: 5Hz~250Hz * Input Impedance: 10K ohms * Input Sensitivity: 300mV~8V * 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset I decided im going to buy another mag and build a box for em... Any recomendation on box size?? should I put a barrier between em ect...

Well im using a 1200w @ 1ohms on my single mag atm... so can't drop down to 1000w a piece now can i.. anyways im working on getting a custom alty for me car so it wont die ^.^ was woundering if adding a yellow top or 2 would help if i can't upgrade the alt?

Could i use a PMA1000HCA, Their specs on the site say 500 Watts x 2 @ 4 ohms Stereo 900 Watts x 2 @ 2 ohms Stereo 1500 Watts x 2 @ 1 ohms Stereo 1575 Watts x 1 @ 4 ohms Mono 2500 Watts x 1 @ 2 ohms Mono 3000 Watts x 1 @ 1 ohm Mono http://www.alphasonik.com/ 2500w @ 2 ohm for my 2 mags?? that would be like 1250 apiece... and if i adjust my gains correctly shuld work fine?? And this is how i would wire it correct? http://img474.imageshack.us/img474/9972/du...C2ohmto2ohm.jpg

Well were do i start... lets see i currently have a nINE.1 running my 12" mag d2... this month i will be ripping my car apart to deaden it >_< that mag rattles my car like crazy... anyways... im thinking of getting another 12" mag for sure also i have the thought of possibly getting a total of 4 and just taking my rear seats out but my main question is should i get new amps when i get my other mag or if i go with the 4 should i change my amps out?? or just buy some more nINE.1's this wont be for like 2-3months because 3 mags arnt cheap plus the cost of amps...

ooo so i can get another nine.1 and run em both at .5 and 1 for each sub? that wi;l; save me some $$ but then again i dont wanna push the amps 2 hard :/ anyways i was thinking 4 12" mags facing up ^.^

ok cool, so thats like 1400$ or so for amps and another 1100$ or so for 3 more subs, and probably like 300-400$ for my noise dapening mats, and then the cost for the box's wich i will have made for me, 300-400$ plus all the wiring ^.^ im looking at like 4000$ easy... woohoo i start saving 2day no more lunch for awhile i guess...

ok cool, those go for like 1000$ dont they? and they put out 1800w so 900 each sub?? i was looking for atleast 1200w a sub was looking at the Z7000 as well it puts out 1500w@1ohms was thinking maybe 2 of those if i get 2 mags or 4 if i get 4 or should i just get 1 amp to run all 4? or 2 w.e. i decide to do..

lol 30fps camra <{POST_SNAPBACK}> if only i had a 100 fps camra i could barely keep trackw ith just my eye sight.... O_o wait i culdnt even do that

lol 30fps camra

ok lol i couldnt find my post and was like ahhh!!

sounds like i need more dynamat and i mean ALOT MORE and its loud as freakin hell and that was with gain at 1/2 i cant really do more.. well i can but dont wanna yet....

yea when i get home 2day hopefully it will still be ligth otu if not i gues i could shine a flash;ight or 2 <{POST_SNAPBACK}> spelling> you <{POST_SNAPBACK}> hmmf maybe thats why i failed english... srry im not used to typen on my laptop typos anyways heres the vid of the sweep didnt take a vid of it all tho just the exiting parts... funny thing is my camra showed that the sub was slowly moving but it was actually moving to fast 2 tell pay attention http://www.clanfreedom.net/images/jons/Movie_0002.wmv

yea when i get home 2day hopefully it will still be ligth otu if not i gues i could shine a flash;ight or 2

i do O_o atleast i better... it was "profesionally installed" lol even tho the morons blew my fuse on my sunroof scratched my damn amp cuz it wouldnt fit under the seat... and my rear driverside didnt get enuff dynamat... oh and my passenger window vibrates when rolled down or when i close the door.... but driver sides fine... gawd.... atleast their gonna "fix it"

heck if i kno but when i crank up the volume it starts getting pretty damn hot almost 2 hot 2 touch guess that why ur not sposed to have your volume at 60-74 when ur HU max's at 80 lol i wa splaying with it for awhile when i checked... and i had it cranked up for like 10 min or so... nut the NINe.1 was fine and the NINe.2 was hot :/ i think I AM A rip it apart and add a FAN or 2

next time, all y'all so cal'ers should come to AZ <{POST_SNAPBACK}> ok will do... anyways i can't drive for another 2 months well legallt anyways AZ?? what part i have a friend out there... he lives in Scottsdale... in phoenix O_o hmmf and i needa show him my sub also

lol ok dokie... i just got a 1-35hz tone bit its darks o ill do it 2marro bass sweep or w.e.