Lord Baccus

so im dummping my SS equipment and going with PAP ( Pierce Audio Products ) http://pierceaudioproducts.com/forum/index.php

price ? and is this 2- 1500d strapped internally ? like my Massive 3000.1 ??? can the SAZ 3000d be strapped to another SAZ 3000d to get 6000watts ?

Very Nice I digg the huge port on that boxx, what is the CF of the box ? how many Sq Inchs is the port ? Freq ?

i need to finish out the boxx and wall off the open side where the batterys go

i measured from the subs to where the mic go's and got 7' give or take an inch. so 7'x4=28' gives me the 1/4 wave devide 1131 the speed of sound by 28'= 40.39Hz so i port to 30.39Hz - with cabin gain should peek @ 40.39Hz but what about the ports fireing 90degrees out of faze, ??? subs are pointed forward into the back of the seat & the ports are fireing up along the back window line. i drive a 1988' Ford F-150 x-cab

what if i change where i put the meter ? and build to target say the Legal Usaci position of passangerside A piller ?

did ya like the pics the WMD logos glow from the blue lite on the amp... pic does not do it justice ill do the port measurement ASAP

i only said that cuss if it has been sitting around would give it time to break in & i hooked up a pair of 10" JL subs that a friend let sit around and the surounds crummbled... he had em in his garage

id go with the 4ohm load :0 as you said the sub has been sitting around for a year !?! longer than id let 1 sitt might be aged ? sourronds ripp, spiders give ect ect ect

no not a typeO i tried to meke the slot port 14.5 High by 4/3/2/ and the length was deeper than the boxx... i did a simular port for an armrest subs fireing to the rear port into the armrest , he did 1000 on ea sub and it freeking wangged

Box Parts (Square Prism) 1 Top, 1 Bottom: 17.04

That is excactly what I was trying to say with my first post. I was trying to figure that out from the link. sorry the formula assumes the subs & port are fireing forward... maybe that accounts for the differance in the formula & the accual res of my truck. thats an 8Hz differance

so how do i account for the 90degree sub/port ? i measured from the subs to the point where the mic will be ! should i measure from the port to the roof & from that point on the roof to the Mic spot ?

You never cease to amaze me with your nonsensical babbling. 1131 Feet per sec/20 Feet = 1131/20 per sec or 56/sec or 56 hz Mathematically that portion is just fine. WTF are you talking about. I will save my issues with the rest of the article for later, but dopey you completely missed. do you know if im correct ? with 7' from the subs to the mic 7x4=28 28/1131=40.39Hz so tuneing rufflly 10Hz down puts me @ 30.39Hz do i need to do any additional math to account for the port fireing 90degrees out of faze ? the subs fire forward & the ports (2) 6" Presision Areo's fireing up along the back window line, in an Old Ford F-150 X-Cab i put the mic on the Drivers side Kick behind the emergency break.

please any info would be helpful as i am about to port my box i have my boxx ported @ 54Hz & it Peeks @ 62Hz on a Hott day & peeks @ 65Hz on a cool day the resonant freq of my truck is 48Hz but ill be Dammad if i can get it to hitt @ that Freq.... i was going to try porting to 38Hz for Street Beat... butt according to this formula im hitting too High ??? i meeter on the drivers side Kick - behind the emergency break... only place i can get the mic to stay put

please explain ? whats a white paper

http://www.ozaudio.com/docs/SPL_Theories_and_Tips.pdf reading is a great tool opps i let the secret out

so enuff with the saspence... what did it hitt ??? db wise that is ???

Please explain this to me ??? nice name by the way where did you come up with that ??? Hummmmmmm i wonder ? cant quite put my finger on it ? sounds like something iv built before

how much for the system ? Bigg Props for going all out Bro

Cool ! i have Modded the boxx by adding another faceplate, fiberglass resin, 1/2 round trimm in the seems, and will be adding a few secret angles to help the port to load better, built a dropp in port for Street Beat. just got dougs other boxx with the Twin 6" Flared ports

go x2 on the power... to that sub youll like it a lot more

How so ??? Are you a Friend of Doug B. ??? do i know you ?

im working on it 1 weekend @ a time