Lord Baccus

Hell Ya Bro

pics please... how many tweeters ? Wow

Thanks did you notice that this thread started as a joke and has gotten very serious i do take your addvice and try to work it into my SPL Explorer... iv noticed that when i turn down the subs i have a lot of LOSE plastic rattles gonna need a lot of sound dampener where is the Raamat ? can i get it local in Dallas Tx or do i have to order it ? i used P&S cuss i allready had 1/2 a roll and it was better that nothing i know Bandaid was a good discription... BUT it does sound dramaticlly different than the coaxials without and dampanning

Thats Sweeeeeeeeeet !!! ill get on mine ASAP ill have a lil more trouble getting to the outer skin as the holes are not that big so ill have to piece it in there anyone have suggestions on crossover points ? i started with the 6db setup on the crossover where do i need to set the Hu's crossover point ? what freq? and the mids ?

its a start now that x-mas is over, i can get some more deadner and do the doors properlly. i started with the stock location as suggested... sounds WAY BETTER that the coaxels its a start toward some kind of Sq

x2 what he said ^^^^^^ thats a Lot of Tweeter Wow that has to be really clear

9887 as i hAVE IT AND IT IS sWEEEEEEEEEEEEET

let me know for 35.00 there sold but for now i'v removed the SST 6.5 and put some P&S on the doors to dampen the buzzzzzzzzzzzing and rattles installed the crossover added the addapter plate i cut from Mdf added the MbQuart Qm130 5.25" mids after moving the tweerer around with double sided tape for an hour i rested here as this is where they sounded best to me, with my eyes closed the differance is Wild, im hearing things that were not there before ??!!!?? i faded the sub DOWN to blend in with the music using the Kove Audio Aphex Ax1 and Wow what started out as a joke thread has become very seroius indeed EVERYONE that hears the system now is impressed with more than the Bass im sure theres better mids & highs out there but for now this is a great start

i think hes geting me a set of MB Quart 6.5 ? dont know what model yet ?

i did a 154.6db with Dougs Ia40.1 wired to 0.4 ohm had 1 Kinetik 2400 battery 2- 15" / 7cf / 52Hz Doug & Justin Rule

Cool ill pull off the door covers and Peel&Seal them this weekend... a friend is giving me a set of components tonight so i can get started ill use double sided tape to place the tweeters till i find the sweet spot. ill start with the stock location, for the Mid driver any crossover points i should be aware of ? i notice crossovers have jumpers for different slopes / is this for the tweerer / mid or both ? i can control these from the 9887 i have a laundry list of questions i need to ask and takes too long to type. oh and Thank you for helping

Bro that has Saddness all over it sorry for your loss

Justin :) can you or doug help with me with placement and or suggestions as to where to put a good set of Mids & Tweets and if you know anyone that has a decent set or either local

not going neer that 1 with a 10 foot pole

what did you wind up doing with it ?

how did you calculate the Cf of the boxx with that wild angle for the 18" Wow that was cool did it sound good ? i have allways read that 18" need a lot of air space ?

Iv had attacks like that but i usually passout and bust my head open on the concrete... i have a bad heart... i woke up a few minets later after i cleaned the blood off my face lucklly i was sitting down the last 2 times... glad to hear your ok

Great build !!! any pics of the finished boxx ? what kind of cloth is that your using for the FG ?

Wow that is a great read ! gave me some ideas to work with i have to try a FG install ASAP i have used FG to resin the inside of my boxxs but have yet to do a true FG Boxx with streched flece, i never thought it could take the pounding... i like the 18" install as well and that IB was Killer

i.e. ( need example ) i dont know how to Sq just yet im still learning i did look up a lot of other Explorer's and 98% had the front speakers in the stock location 2% had kick pods

Sweeeeeeeeet ill set the crossovers on the amp to: Through >>> and let the Hu do the driving ! now i need a set of componets.

^^^ Ditto whay Brian said louder No deeper Bass Yes SPL ( loud ) small box ported High Booming Bass Big Boxx ported Low Just my .02

the old Prototype / what ohm are the coils ?

is it for home theater ? looks pretty sttight forward sub where did you get it ?

i cant use my 4ch PPi ? i thought it was 3way - tweeters / mids / with sub. i have to get another amp ?