box for BL 18s

[07_ZX10 4]

Without going over my windows and taking the whole back up, i have 40" D x 46" W x 22" H, which is 11.8 cubes gross, will that be enough for 2 BL 18's? It says to use 5-10 cubes each, thats a wide range, i guess depending on power to them mostly. I will be running 2 saz1500d's strapped to them. I have more room than that if needed, just want to leave a little space for batteries and amps.

[07_ZX10 4]

after doing some better measuring, i have 46.5" W x 24" H x 30" D, which is around 16.5 cubes gross, after sub and port displacement will that be enough

[johnecon2001 82]

That should be plenty. If you can give each sub around 6^3ft each, that would be ideal. Then you have 4^3ft left over for port and subwoofer displacement

[jaynanspl 17]

I did not know for sure what you were putting this in, and what tunning you wanted, but this is what I came up with using your info.

Hope this helps

Jay

[07_ZX10 4]

its going in 97 expedition and want it tuned around 32-34hz. I think the second post i made is going to work out pretty good. I will order subs and anothe 1500d next week and hopefully start box by monday.

[Dee 0]

If you guys dont mind me asking..jayson what program did you use to make that design fo that box

[07_ZX10 4]

that program looks like google sketchup, i downloaded it, but what i have made on there looks nowhere near as good as that. I have played around with it some, but need some time with it.

would i be better with port like that in the middle or 1 that goes all way across box. thanks jayson for design also