07_ZX10

thanks, I may still get btl's instead this time. Will decide this week when i order, Im sure it will b a last minute decision

I ran 2 bl 18's off 2 sundown 1500d's for little over 2 years with no problems at all. Those bl's had cooling, flatwind, daily options. Now they offer to have a 4" coil for extra $50. This time I will be running either an aq or sundown 3500 on 2 18's. With the 3500d should I go ahead and get the 4" coil, Im pretty sure the 3" would be fine since I ran the others with no problems that long. thanks for suggestions

i bought 2 bl 18's d2's in 2008, one in october, one in november. Now i am wanting to run 3 18's but was told not to mix those 2 with newer bl 18. I got these 2 with cooling, flatwind and universal options. Do you have any older bl's in stock or stuff to build one? Or could I run a new one with those? thanks

i have had the old for sale for ever with no luck, and they are in perfect shape. Plus i sale those, it would cost more money to buy 3 new ones. I will just find sub to recone

jacob did u receive my payment for 3500d

payment sent for 3500d for $700

I emailed u for 1 of the 3500d for $700

nevermind, i didnt finish reading original post about pics.

do you have pics of the scratched 3500's and the not pretty (lol) 3000's

Fi recommends 5 to 8 each now, I thought it used to say 8 to 10 each, oh well, starting over this week

My old box designed by chris fishercustoms, for daily pounder. Its 49"w x 26"h x 32.25" d with port facin back 9"w x 23.75"h tuned to 33hz. Everybody that sees it says it is way to big and should only b around 14 to 16 cubes. But fi recommends 8 to 10 cubes each. Anyway it sounded good on everything, but I took it out and tried a 4th order bandpass which was good also. Now I want want my backseat back and thought bout tryin some aero's. Any suggestions on the new box, aero's or stay with slot? Thanks

Show is being held behind University Mall in Tuscaloosa, Alabama. Mainly car and truck show, but suppose to have TL meter there for spl contest. May 22nd from 8am til 3pm. All proceeds go toward salvation army adopt a family program.

i didnt see them on the website to order them. I only saw the b-stock ones and they say dont use upside down. Do you have any spl tiles in stoock? thanks

thanks

I checked all wires, rca's, all speakers work on all 3 other channels but channel 4 just has his sound in it. Changed rca's, same thing, how much to send in and get it fixed? thanks

Got this design done, everybody told me they thought it would b louder and I was anxious to try it ou

Well, i had subs up, port back in 2 different boxes, then walled and now got design done by robin for 4th order bandpass for 2 bl 18's. Took couple pics when building, will take some pics of all in truck tomorrow. Still got to put other front on, make trim panels and repaint inside of box. But i can do all that while its in the truck. I am using matt and fiberglass on all seams inside, has 1" rods inside, and adding all thread from side to side for extra bracing. Hopefully will be finished by tuesday. Still got lot left to do, but had to put in truck while i had the extra help to move it. So far, just from playing around a little it sounds alot louder, has a total different bass, very deep. Will post updated pics later

Its facing thru the front seats in an expedition. Guy that designed it said try it to the front and the back to see what i like best. I probably wont ever try to the back, cause i know it would b 10 times worse rattling to the back. Im happy with the sound now, just makin it look better, and thanks for the good comments

I have never heard that about having the basket part needed to be turned to the port, maybe a 6th order or something. Almost every 4th order i have seen you could see the subs thru the port. The guy that designed it has done several 4th orders so it was built like he designed it.

i have 45s in the front section and have the others cut to go in, but like i said there was bout 5 people at my house so i got them to help me put in truck while i had help. I still climb thru the port to work now, i matted and glassed all tuesday and still need to get back in and do the other 2 45s. Yes, its bolted to the truck with 8 bolts to where factory back seat was, and then has 6 or 8 3 inch screws with flat washers in the back area temporarily until i get under truckk again. Inside the box will be sanded again and repainted white this weekend. The box was tripled on front layers, as soon as suede arrives the other front will b wrapped and put on, flush panel for amps will b wrapped also. Out of all my boxes, this is by far my favorite. I dont have pics of the wall except for the design. I only had the wall in for a couple weeks and went back to subs up, port back.

welcome fellow alabamian,

i had same amps ( 2 saz1500ds) in all setups, The 2nd box i had subs up, port up around 20 cubes tuned to 33hz sounded louder acutally than the wall did. The wall was 19.5 cubes tuned to 33hz also. I did a 150.? on tl with 3000 watts with ssubs up, port back setup. I never had the wall metered, and it sounded great also. I initially was goin to sale the 2 bls and get 4 ssd 18s and do a clam shell or 4th order wall. Our work got cut back to 32 hours, so gettin more wasnt option right now. I built 2 boxes for local guys in town and that paid for me to build new box, lol. So, i decided to try the 4th order with what i already have and be able to use my back window again. This box is like 4.5 sealed into like 19.5 or little more tuned to 48hz. And it picks up the lows alot better than any box before, sounds good on almost any music now. Hopefully will get metered next month at local show. I have to get new radio this week, i cant even play cd's now, unless i can find some tones onliine to try out.

got inside box and matted and glassed inside today, gotta do some sanding and more painting inside. Waiting on suede to finish wrapping the other front to go on. Just from tuning a little more everyday, it sounds good on any music, it really picks up the lows alot better and sounds alot louder.

thats cool, im goin to showfest also. We r leaving the 14th, so i will look for any of yall there

welcome, im from tuscaloosa, alabama. There is show here may 22nd, supposed to have TL meter, car and truck show also behind university mall. All proceeds go to salvation army adopt a family program