sound=vibration

Here is a small teaser form my new build. It has been way too long since I have been active in car audio and I am finally back! The 3kd took a shit before I could finish filming so this is just a small teaser video until we get another amp in! Enjoy and does anyone remember me around here? Built, Shot, and edited by Felt Not Heard Productions aka My brother and I.

I have two Cannon 60d and I use Adobe Premiere to edit with

The enclosure is 5 cubes after displacements. If I remember correctly its about 82 sqin of port and it is tuned to 31.5hz with 45 angles in all the corners and a double flush mount top baffle...

I see my self getting a few of these this year!

I've been gone sometime! Still doing audio here and there but I've been doing lots of photography and cinematography. Here is some raw footage of a car I am shooting here in Az! The owner has two of his cars in a huge blockbuster film coming out soon. Check out my channel for other videos! This just a short clip I think you guys will enjoy! We have something huge in the works! Like is on Facebook under Felt not heard productions

Yeah I recheck my calculations about 5 times because I felt like that was crazy big for a single 18. When I built the box I stuck a 2 liter in the port and shook my head thinking great this is going to act like its free aired. Surprisingly it sounds awesome it just has a steep roll off around 55 - 60 hrs which is ok with me. I think that is a perfect area for blending in the front stage!

Ok guys here is a short video I did for my friends enclosure I built him. He did the carpeting and paint so shout out to him for that. Any who it is an SSA Xcon on maybe 1000 Watts I believe it is running at 2 ohm a lot of port area tuned down to 32hrz. I've done many enclosures in the past but holy hell does this enclosure/sub setup really dig low. 25hrz drops are no sweat for it.! Enjoy I didn't have much footage so did what I could with it. https://www.youtube.com/watch?v=2zpkOvLLJzk

Honestly I build the enclosure about a year ago if memory serves me correct 150sq in

I got bored with photography so I started shooting and editing videos. Here is one I did of a customers enclosure build. I plan on doing my entire build log this way... Enjoy comment!

Thanks keep an eye out there will be more

I wrecked the hatch a few months back so back to work again! Here I am grinding off the front of the core support! I didn't take many pictures as I was really upset having to rebuild the front end for a stupid mistake however this is the end results Oem parts used all welded in by myself I think I did decent for my first Core support swap. What it looked like after the wreck.

So some back story I bought the hatch back my senior year of highschool with the intentions of making a loud daily driver setup and ended up getting real involved with build car mainly Hondas. I always helped with other builds but was never able to do what I wanted to mine until now. I did end up getting my setup together as far as audio but the hatch was never what I really wanted it to be. Recently I have become a single man and around the same time I was promoted at work and now make enough to redo my hatch while still providing for my two daughters. Basically I am doing this now because I finally can!! I have been out of the scene entierly too long and I am back now. Hope some of you around here remeber me haha. Keep in mind I have done everything to this car with my own two hands. I has never seen a shop!!! So here we go I cant find my old build on here but I will start fresh here. I have gone through 4 engines and now have decided I want reliability so this is the tear down. While I had the motor out and at the machine shop I wanted to liven up my engine bay. I was set on painting it a light tan and found out someone close to me had been diagnoised with breast cancer and decided what the hell pink it is.! Kinda of a dedication kind of deal. I got to work here are some pics. This above was the tear down after I removed the engine. I dont have any picture of it but I completely tore down the ending I have spun a bearing in and it is currently at the machine shop. More on that later this week. After hours of sanding and prep work. At this point I had also done a full wire tuck re-routing all the headlight wiring, turn signals, ac, brake fluid level sensor, engine harness wiring as well as the whole engine harness, and wiper motor wiring has all been taken out of sight and yes everything is still completly functional. Preping and shooting her with primer. It is a pain trust me fingers were raw by the end of the night. Holy batman pink! My nieghboor is a painter and helped me shoot the actaul paint it self Lots of fun cant wait to do the exterior!!! here I put the bumper headlights and fenders on, I already have new replacements for them but I am keeping them off until I paint the exterior in a month or two. This is everything that will be under the hood minus engine and tranny everything else is relocated or hidden. Still need to remove the brake booster and paint it gloss black. It is in horrible shape at the moment. I am also going to re-route all the brake lines and position the prop valve in the interior of the car, the battery is relocated to the rear of the car now and the under the hood fuse box has been relocated under the dash. Ill get pics of that when I start messing with the interior some more. As of now I am waiting to pick up the Block which is a D16y8. I had it bored and shot peened the rods with arp studs pressed on and resized, it also has been jet cleaned, decked and honed. I already have my master rebuild kit in the garage as well as brand new pistons, water pump, oil pump, and every single gasket. The rotating assembly was also balances as this is going to be TURBO charged after break in.!!! I promise pics of the engine as soon as I get it from the maching shop and I will also take pictures as I assemble it. MARK I need a pink SSA sticker for the Firewall. I will also be getting breast cancer awareness banners air brushed onto the shock towers!!! Things I have done that I dont have pictures of Integra GSR rear disk break setup already installed with sway bar All new bushing in the suspension New ball joints New inner and outer Tie rods New pads rotors and calipers all the way around Steel braided brake lines Skunk2 adjustable coil overs Tockico blue stuts Front and Rear adjustable camber kits Front Sway bar kit Rear beaks tie bar Full dash swap All the interior has been changed to black interior minus the rear hatch plastics. I am still trying to find decent ones. I also have new carpet for it that I have not installed 00 si front seats Integra rear seats I promise picture of all this as I go through this build. Plan is to have the car back on the road in about 3 weeks as this is my daily driver. So when it comes to audio muahahhahahahahaha. I have everything except the tweeters I want. My setup consist of 2 Icon 12s 1 Audio pipe 3kd 1 Kicker 400.4 dx I belive is the modle number 4 AA Audio Carbon 7in mids Two fiberglassed kick pods and two kicker Tweets all of it has been pulled out of the car while I redo the interior This was when I made the kick pods about a year ago. Excuse the dash it is long gone now. . And here she is a few years ago I did a photoshoot with her in it. She needs some body work now lol!

Uppity doo

Up for sale are my 2 Icon 12s. They are the triple slug Icons with the vented pole piece and inverted dust caps. One is Brand new still in the box and plastic in side the wood crate. The other one is slightly used and has sat in my closet for about the last year and a half. The reason I am selling them is to fund my new project that will consist of Xcons. I am in no hurry to sell and price is OBO. Not looking to separate at the moment. Will entertain trades however more than likely will only take cash.... Price $550 shipped for the pair again OBO I will take offers... So offer away. Pm me with any questions offers or concerns. On to the pictures The used one is in fact dirty I did not clean it before the picture I have nothing to hide and it will be cleaned before shipped or picked up... If some one wants to see it cleaned up feel free to ask and I will take new picture of it wiped down. The first picture is very light due to using a mechanical pencil...

So are you asking for help designing it?

Need mine! I have a new build coming up in a SUV. Should be bringing her home Friday!!!

Let me double check however I know they are 1 ohm DVC obviously...

Bump

Thanks for the BDAY wishes. The forum was down for me and couldn't get back to you guys but here is my Thanks and happy bday to everyone else!

After the holiday bump!!!

Upp up and away!!! OFFER UP...

1. We will need max dimension or max air space you have to work with 2. What is your budget 3. Are there any subs you already had in mind With out more info we can be no help to you.

Nice!

My new overflow bottle I had fabbed up at work! Excuse everything its dirty from working on it.

I would imagine their biggest target would be truck setups were space is very limited underneath the seats. I could be wrong.