klee7013

sorry about thread steal but its about same thing here is what i have the part on the upper left is the stock wiring with fuses-- i am looking at getting a xs battery and first off terminals will be switched up positive on other side and i have to add another 1/0 guage to go to my alternator to finish the big 3 so what would be the best way the extend these or to wire it up to a new battery was looking at getting a d2400 or a d 6500 any help would be appreciated thanks

Thanks! I have been working on this thing for a long time not exactly how i wanted it but not bad for my first system and first time with fiberglass. not sure about the grills i took them off and tested with out a minute ago but didn't go to full power gonna go to where i work later and let it go full tilt and check on the excursion- if they dont work i am gonna leave them on while i drive if i have stuff in the back seat and if i want to blast them just pop the grills right off just takes a minute to pop them off with my panel tool ill try to post a video tomorrow- of how it works but it will be from my droid so crappy quality

waiting for some caulking to dry then i am gonna mount the last sub hopefully more updates with finished results soon thanks for all the help SSA

thanks everybody- gonna play golf this afternoon- then if i am sober enough when i finish i am gonna try to mount this bad boy in ya it has been a long time summer is a hard time for me to do anything. especially this year i work for a small company and this is the best year we have ever had and been in business since 1988 keep looking back for updates

more pics of 2 subs mounted in just a bit

hmmm hope we dont have to wait a year for pics of what your doing now

dam was gonna call bs then i saw jacob posted so i knew it would be could- cant wait to see this one finished--

Tim Hudson makes $15,000 after the following... .05 Games .03 Wins .21 Strikeouts .36 Innings pitched You will need to work 622.22 years in order to make Tim Hudson's annual salary. only 602 more to go lol

got a mbquart 4125 and alpine type r components in the front and trpe r coaxials in the bac recommended rms 110 for front and 100 for back i know you dont set these by output voltage but tested and the most output voltage was 8 volts ac after i thought i had it set right could i have my gain set to low- or my filters set wrong-- i know yall are gonna go ask so i will go out and see exactly what i have everything set at also for my sundown sae1200dv2 wired up to 3 sa8s wired up to 1.3 ohms the voltage should be around 40 vac or am i wrong on that- when i just checked what the amp was pushing before i messed with gains (subs were not hooked up) iit was 100 vac at max good thing i checked -- ' also with this i have trouble setting gains to what i am trying to achieve-- gonna go check sorry for the noob post i got an pioneer avh4100 i think that does 4.2 or something like that so i did 1/3 of a turn above min on sae and 1/3 of a turn from 6v cant want looks likes i may have my box in this weekend-- for any of yall that have been watching it

would love to come but got to work Saturday if u still do it after then i might go just to meet everybody- i guess i would test mine to even tough i didnt make it to be loud- just wanted some thump good luck on the turn out this weekend would love to see some pics or maybe vids

ya i have seen one of those used at a house showing where all the air leaks where-- around sockets- attic doors- can lgihts- then they went and sealed them up-- but i believe u don't want your house as tight as can be i like a house to breathe - it seems house that are sealed up tend to have lots of problems just my POV

thanks had alot of rough edges on the boxes sanded down and know im all itchy and nose is clogged up with all that fine dust- should a wore my mask but i forgot

good stuff- got the doors done- used almost 3/4 of the box sent usps of the cld on all the doors- got a little trimming left- the mid bass went from ehh- to dam i didnt know these had that in them-- i was opening everything up i was like where the hell is the velcro and cement about 30 mins later i went thanks for the great product again

mid bass turned from ehh i thought these speakers where good to dam where the hell did that come from right hand looks like i put it in a brier patch and twist and turned it around then pulled out- ouch

more pics of the doors- for the most part they are all done- jsut got to trim the front doors up a wee b it so they can fit- they pop out with a lilttle tub- got to scrap off some ccf where they hit and wont got any deeper pic of the cld on back doors some more pics cutting the mlv mlv test fit ccf before trimmed

i am trying to get a logo for work so i can put it on our website, send it to people when we advertise and make business cards if anybody could try to photoshop and make a good quality picture i will send you $25-$40 paypal for the one i decide to use-- if you impress me more than i thought then more money may be involved i like the second one better but i will see if anybody can help me and i will definatly pay for your services thanks kevin

thanks ya when i get it all in i am going to need some help tuning it to make it perfect would love to check yours out someday also you still in myrtle beach every now and then if so hopefully i will have this finished in a week or so--(cant even count how many times i said that throughout this build) and i can ride up there and meet you and get a demo of yours also thanks for all the help you have given me so far

thanks scott and chicago --- scott i have always watched your stuff and could tell you had lots of knowledge over on club frontier then i came here and found you again chicago i love ur vids with your sa8s arent you upgrading to sa10s or 12s or did you change your mind?

some deadening of passenger side door- just with that one door done it sound alot better and louder- cant wait to get them all done sorry its always dark when i take pictures test fitting mlv didnt take a pic of ccf on mlv sorry i get into it and cant stop till its done i am like shit forgot to take pics i know i did i did the mlv /ccf pretty good because it was a pain putting the door panel back on got it just hitting the edge around most of the panel Look for more updates tomorrow- hopefully alot more

I raise you a dB. I'm waitin' on the vids and I raise you 2dB I am all in and will ask the wife to film it. Good Luck with that! If you seen me in person you'll know. I can convince a nun to lose control. But really OP, ask shizzzon about the secret project from DC Power. I am completely sure they can give you an alt no one else can. Starts thread out wit 175dB and you get 30 virgin supermodels filmed by someone's wife and the world's biggest baddest ass alternator company DC Power. lol. reminded me of

2 pic of testing tonight- i cant ever take alot when i want to because my dad is helping me out and he always act like he has something better to do so i try not to take to much time to take pics subs mounted in the box on my makeshift mdf/sawhorse table i have been using for about 3 weeks pic of wire going out of back window connecting to the box sorry about terrible quality pics with the phone and was playing music one reasons subs where blury thats it for tonight plans for tomorrow leave work ASAP (usually i sit around and BS) hopefully i can get the rest of the fiberglass done- didn't see any flex or cracking just one corner where i was almost postie i was gonna have problems so no big deal Take the front door panels back off and apply some tiles, rope, and fit the ccf and mlv- then go test out what a difference that makes i hope alot hopefully by then glass will be dry so i can cut/sand rough edges off and vacuum all the dam mat i got floating every where for over the last month my build has been moved from work where i started cutting wood, to a shed at the old house i used to live at while it was on the market, then to a cramped shed at the new house-- k night night and thanks for the compliments i defiantly wouldn't have tackled this without all the helpful people on this forum

Tested out tonight a little more fiberglass had 1lil air leak . Then lots of finishing work. Is vinyl hard to do if so I may carpet. Can't type well on the phone